Az Zarqa' Certified Fire Rated Glass & Door Systems for Jordanian Building Compliance

Az Zarqa', as Jordan's primary industrial and logistical hub, demands a rigorous approach to passive fire protection that aligns with both international benchmarks and local enforcement by the Jordanian Civil Defense Directorate (JCDD). For commercial, industrial, and high-occupancy buildings in districts like Al-Hashimiya or near the Zarqa Refinery, compliance is non-negotiable. Antifires provides certified fire door systems and glazed barriers tested to BS EN 1634-1 and BS 476 Part 22, ensuring that every installation meets the stringent requirements for fire compartmentation. These standards are directly referenced by Jordan's National Building Council, making them the technical foundation for local code approval. The systems deliver verified integrity (E) ratings from 60 to 120 minutes, which is critical for containing fires in high-risk zones such as chemical storage facilities and dense commercial blocks. By integrating tested intumescent seals and ceramic wool within G.M.S. hollow steel frames, these assemblies provide reliable barrier performance under the extreme thermal conditions simulated during furnace tests. For architects and contractors in Az Zarqa', selecting products with traceable test data to EI120 fire partition solutions ensures smoother JCDD audits and long-term safety for building occupants. For further reference, the official Jordanian Civil Defense Directorate (JCDD) regulations provide the local legal framework for all fire safety installations.

Jordanian Civil Defense Code Enforcement for Fire Rated Barriers in Az Zarqa'

Enforcement of fire-rated barriers in Az Zarqa' is governed by the Jordanian Civil Defense Directorate (JCDD), which mandates passive fire protection in all new commercial and industrial constructions. This is particularly critical in high-occupancy structures such as the Zarqa Refinery complexes and the Al-Hashimiya industrial zones, where the risk of rapid fire spread is elevated. The local codes require that compartment walls and glazed partitions maintain integrity (E) for a minimum of 60 minutes, with 120-minute ratings often specified for areas housing hazardous materials. Antifires fire rated glass assemblies are tested to EN 1634-1, a standard that aligns with the JCDD's technical expectations for door and shutter assemblies. These tests verify that the glass, frame, and sealant system—including 3mm to 6mm ceramic wool and intumescent fire seals—can withstand furnace temperatures without allowing flame penetration or gap formation. For contractors, using pre-certified systems eliminates the risk of on-site failure during a JCDD inspection, as the entire assembly is documented with a traceable test report. This approach ensures that projects in Az Zarqa' meet the legal requirement for safe egress and fire compartmentation without costly redesigns.

Fire Rated Glass Selection Criteria for Az Zarqa' Climate and Structural Loads

Selecting the correct fire rated glass for Az Zarqa' involves balancing thermal performance with the structural loads imposed by the local climate. Buildings near Prince Mohammed Hospital or educational institutions in the city center must comply with the National Building Council’s referenced standards, which often require both integrity and insulation (EI) ratings to protect adjacent evacuation routes. The local by-laws specify that glazed barriers in healthcare facilities must limit heat transfer to prevent burn injuries, a requirement met by Antifires' 28mm EI60 panels. These panels achieve an insulation rating of 64 minutes by using a multi-layer composite of tempered glass and intumescent gel layers (e.g., 6mm + 5.5mm gel + 5mm + 5.5mm gel + 6mm), which actively expands under heat to block thermal conduction. For projects where only integrity is needed—such as stairwell enclosures in commercial offices—the 6mm E90 glass provides a cost-effective solution. However, for zones near high-temperature industrial processes, the 50mm or 54mm ultra-high-performance glass delivers up to 120 minutes of full insulation. This technical diversity allows specifiers to match the exact performance level required by the JCDD while accounting for the region's high ambient temperatures during summer testing conditions.

High-Demand Building Scenarios for Fire Rated Doors and Windows in Az Zarqa'

Az Zarqa'’s rapidly expanding logistics sector, particularly within the Zarqa Free Zone, creates a high demand for robust fire rated doors and windows in storage and warehousing facilities. These environments often house flammable goods, including chemical containers and packaged fuels, making compartmentation a primary safety requirement. For such applications, Antifires supplies fire rated rolling shutters and vision panels that have been tested to BS 476 Part 22 for integrity ratings up to 120 minutes. The systems utilize G.M.S. hollow steel frames with 20mm x 4mm intumescent seals that expand to close gaps during a fire, preventing the spread of flames and smoke. In warehouse settings, large-format vision panels are often required for operational visibility; Antifires' 21mm FPOS glass (multi-layer composite insulated fire-resistant glass) provides 120 minutes of integrity and 30 minutes of insulation, suitable for separating high-risk storage bays from loading areas. These assemblies are installed with M6/M8 anchor bolts at 300-600mm spacing to withstand the structural deflection common in large steel-framed warehouses. By specifying these certified systems, facility managers in the Free Zone ensure compliance with JCDD inspections while maintaining operational safety in high-traffic industrial zones.

Why Antifires Is the Preferred Fire Rated Glass Partner for Az Zarqa' Contractors

Antifires has established itself as the preferred partner for Az Zarqa' contractors by combining certified product performance with localized technical support. All assemblies, from 90-minute integrity glass systems to full EI120 doors, are manufactured under ISO 9001 quality management protocols and tested to EN 1634-1 and AS1530.4 standards. This ensures that every shipment includes traceable compliance documentation that directly satisfies JCDD audit requirements, reducing project delays. Beyond the product, Antifires offers on-site installation training for local labor forces in Amman and Az Zarqa', covering correct frame preparation, ceramic wool packing (density 210 kg/m³), and expansion gap management (3-5mm filled with ceramic fiber). This hands-on support is critical for maintaining the assembly's fire rating under Jordanian labor safety laws. Additionally, the technical team provides pre-installation consultation to help contractors select the correct glass structure—whether 10mm FPOS for 135-minute integrity or 26mm door glass for 68-minute insulation—based on the specific building use and occupancy load. This combination of certified hardware and expert guidance makes Antifires a reliable choice for complex projects in Az Zarqa'.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire rated glass systems are fully compatible with the Jordanian Civil Defense Directorate’s (JCDD) approval process for commercial buildings in Az Zarqa'. The assemblies are tested to BS EN 1634-1 and BS 476 Part 22, which are internationally recognized standards that the JCDD references for evaluating passive fire protection. Each product, including the 28mm EI60 panels and 21mm FPOS glass, comes with a detailed test report showing integrity and insulation performance. This documentation allows contractors to submit a complete compliance package during the building permit and inspection phases. For projects near the Zarqa Refinery or in Al-Hashimiya industrial zones, these certified systems provide the legal assurance needed for JCDD sign-off.

In Az Zarqa' industrial facilities, such as oil refineries and chemical storage units, the Jordanian Civil Defense Directorate typically requires fire doors to provide a minimum of 60 to 120 minutes of integrity (E). For areas with high fire loads, such as solvent storage rooms or processing units, a 120-minute rating is standard to ensure safe evacuation and firefighter access. Antifires supplies fire doors with tested integrity ratings up to 120 minutes, using G.M.S. steel frames and intumescent seals that expand under heat. These systems are verified under furnace conditions simulating real industrial fire scenarios, ensuring they meet the strict safety benchmarks required by local regulators.

Yes, Antifires can supply certified fire rated glass with custom dimensions for retrofitting older buildings in Az Zarqa'. The manufacturing process allows for non-standard sizes while maintaining the same certified performance, provided the frame and sealant system (including 3-6mm ceramic wool and intumescent seals) are installed according to the tested specifications. For example, the 10mm FPOS glass can be cut to fit existing window openings while retaining its 135-minute integrity rating. Antifires provides technical drawings and installation guidelines to ensure that the custom assembly meets EN 1634-1 compliance. This service is ideal for upgrading heritage structures or older commercial blocks near Prince Mohammed Hospital to meet current JCDD fire safety codes.