Certified Fire Rated Glass in Gorgan Iran: Meeting National Fire Safety Standards

In the city of Gorgan, located in Iran’s Golestan province, the enforcement of the National Building Regulations (Mellat)—particularly Section 3 (Fire Protection)—mandates strict fire resistance performance for all glazed partition systems, doors, and windows used in commercial and residential egress routes. Antifires provides certified fire rated glass solutions that are tested to international standards such as BS EN 1364-1:2015 and BS 476 Part 22:1987, ensuring alignment with local enforcement by the Iran Fire Department. These products are engineered to deliver verified integrity (E) and insulation (I) ratings ranging from EI 30 to EI 120, meeting the specific requirements for escape corridors, stairwells, and compartment walls in Gorgan’s building stock. The systems incorporate G.M.S. hollow steel frames, ceramic wool (3–6mm, density 210 kg/m³), and intumescent fire seals (20mm × 4mm) to maintain structural stability under furnace conditions up to 135 minutes. For project-specific compliance, Antifires offers localized technical documentation and installation support. Engineers and contractors in Gorgan can reference the official Iranian National Building Regulations portal for detailed code requirements. To explore certified systems, review the 120-minute fire rated glass for partitions and walls for high-demand applications.

Gorgan Building Fire Code Compliance for Glazed Partition Systems

Gorgan’s building fire code, enforced under Iran’s National Building Regulations (Mellat), requires that glazed partition systems in egress routes and fire compartments achieve specific fire resistance ratings based on occupancy type and building height. For commercial structures exceeding four stories, EI 60 to EI 120 ratings are commonly mandated, demanding both integrity (E)—resistance to flame penetration and hot gases—and insulation (I)—limiting unexposed side temperature rise to an average of ≤140°C and maximum of ≤180°C. Antifires’ glazed systems are tested to BS EN 1364-1:2015, utilizing multi-layer composite glass structures such as the 28mm EI60 panel (6mm + 5.5mm gel + 5mm + 5.5mm gel + 6mm) and the 50mm EI120 ultra-high-performance glass for extended protection. These assemblies integrate with standard Iranian wall profiles using 12–15mm fire-rated insulation boards and M6/M8 anchor bolts at 300–600mm spacing to accommodate local construction practices. The expansion gap of 3–5mm is filled with ceramic fiber to prevent thermal bridging. For projects requiring verified compliance, the 60-minute fire rated glass with integrity and insulation offers a certified solution for Gorgan’s commercial corridors.

Fire Rated Glass Grade Selection for Gorgan’s Climate and Safety Needs

Gorgan’s location near the Caspian Sea introduces high humidity levels (43–90% relative humidity during tests) and a seismic zone classification, which directly influence the material selection for fire-rated assemblies. Local codes require enhanced corrosion resistance for metal frames and structural stability under dynamic loads. Antifires addresses these demands by employing G.M.S. hollow steel sections treated with anti-corrosion coatings and ceramic wool (density 210 kg/m³) that maintains thermal insulation performance in moist environments. The glass compositions—such as the 10mm FPOS (3mm float + 4mm gel + 3mm float) and 15mm FPOS (multi-layer tempered with intumescent gel)—are designed to resist delamination and maintain integrity under seismic deflection up to 152mm toward the furnace as observed in test conditions. For residential applications in Gorgan’s low-rise buildings, the 6mm E90 glass provides integrity-only protection for 90 minutes, while commercial high-rises benefit from the 21mm FPOS (integrity 120 min, insulation 30 min). To match specific project profiles, review the 90-minute integrity-only fire rated glass for cost-effective egress solutions.

Gorgan Commercial and Residential Project Demands for Fire Doors and Windows

Gorgan’s commercial and residential sectors demand fire-rated doors and windows that balance safety with architectural transparency. For commercial high-rise buildings, EI 60 to EI 120 ratings are required for lobby entrances, stairwell doors, and corridor windows to ensure compartmentation. Antifires supplies 26mm glazed door glass (5mm + 5.5mm gel + 5mm + 5.5mm gel + 5mm) achieving integrity 89–90 min and insulation 68 min, suitable for egress doors in Gorgan’s office towers. For residential apartment buildings, EI 30 to EI 60 systems are commonly specified for kitchen and hallway partitions, utilizing the 28mm EI60 panel with integrity 66 min and insulation 64 min. All assemblies incorporate intumescent fire seals (20mm × 4mm) around the perimeter to block smoke and flame propagation. The maximum deflection of 38–152mm observed in furnace tests is accommodated by 3–5mm expansion gaps filled with ceramic fiber, ensuring the glass remains seated under thermal stress. For residential projects requiring verified performance, the 30-minute integrity-only fire rated glass for doors provides a code-compliant solution for internal openings.

Antifires Brand Advantages for Gorgan Engineers and Contractors

Antifires offers distinct advantages for engineers and contractors in Gorgan through certified product performance and localized technical support. All glass systems are tested to BS EN 1634-1:2014 and ASTM E119, providing verifiable test reports that meet Iran’s National Building Regulations. The product range includes integrity-only ratings (E60, E90, E120) and combined integrity and insulation ratings (EI30, EI60, EI120), allowing precise specification for Gorgan’s varied project types. Antifires provides detailed installation guidelines including ceramic tape (3–6mm) placement, anchor bolt spacing (300–600mm), and expansion gap management (3–5mm) to ensure field performance matches test results. For contractors, the pre-assembled glazed door and partition systems reduce on-site labor and minimize installation errors. Additionally, Antifires’ technical team offers remote consultation for Gorgan-based projects, assisting with system selection and compliance documentation. To explore the full range of certified systems, the fire rated glass partition solutions page provides detailed specifications and downloadable test certificates for local review.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire rated glass complies with Iran’s National Building Regulations (Mellat) for Gorgan. All products are tested to international standards including BS EN 1364-1:2015 and BS 476 Part 22:1987, which are recognized by the Iran Fire Department for local enforcement. The systems achieve certified integrity (E) and insulation (I) ratings from EI 30 to EI 120, meeting the specific requirements for egress routes and fire compartments in Gorgan’s commercial and residential buildings. Antifires provides test reports and installation documentation that can be submitted for local building approval, ensuring full compliance with Section 3 of the National Building Regulations.

For commercial high-rise buildings in Gorgan, the required fire resistance rating for windows is typically EI 60 to EI 120, depending on the building height and occupancy classification under Iran’s National Building Regulations. Antifires supplies certified systems such as the 28mm EI60 panel (integrity 66 min, insulation 64 min) and the 50mm EI120 ultra-high-performance glass (integrity 120 min, insulation 120 min) to meet these requirements. These windows are tested to BS EN 1634-1:2014 and incorporate intumescent seals and ceramic wool to maintain performance under furnace conditions. Contractors should verify specific ratings with the local building authority for each project’s egress and compartmentation design.

Yes, Antifires provides certified test reports from accredited laboratories for all fire rated glass systems, including those tested to BS 476 Part 22 and BS EN 1364-1. These reports document integrity and insulation performance under standard furnace conditions, meeting the documentation requirements for Gorgan’s building approval process. For local installation support, Antifires offers technical documentation covering frame assembly, sealant application, and anchor bolt spacing, along with remote consultation for Gorgan-based contractors. For projects requiring on-site guidance, Antifires can coordinate with local partners to ensure proper system installation and compliance with Iran’s National Building Regulations.