Kimhae Fire Rated Glass Certified for Korean Building Code Compliance

Kimhae, a key industrial and residential hub in Gyeongsangnam-do, South Korea, demands rigorous fire safety standards for all building developments. Compliance with the Korean Building Code (KBC) and Korean Industrial Standards (KS F 2845, KS F 2257) is mandatory for fire-resistant glazing systems used in compartment walls, egress routes, and hazardous material storage areas. Antifires supplies certified fire rated glass solutions that meet these local regulations, providing tested integrity (E) and insulation (I) ratings from 30 to 120 minutes. These systems are engineered to support Kimhae’s diverse construction projects, from high-occupancy commercial complexes along the Nakdong River to automotive parts factories in industrial zones like Juchon and Samjeong. By aligning with KBC Article 49 on fire resistance structures, Antifires ensures that architects and contractors can achieve seamless local authority approvals. For detailed regulatory guidance, refer to the official Korean Law Information Center for the latest KBC updates. The company’s 120-minute fire rated glass products are particularly suited for high-risk zones, offering verified performance under extreme conditions. This localized approach ensures that Kimhae buildings not only meet legal requirements but also enhance occupant safety and property protection.

Kimhae Building Fire Safety Compliance with Korean Building Code and KS Standards

Adherence to the Korean Building Code (KBC) and KS F 2845 standards is non-negotiable for fire-rated glazing in Kimhae. These regulations specify fire resistance ratings (FRR) based on building occupancy, height, and compartment usage. For instance, egress corridors in multi-story residential towers require a minimum of 60-minute integrity (E60), while chemical storage units in industrial estates demand up to 120-minute insulation (EI120). Antifires’ systems are tested under BS EN 1634-1 and ASTM E119 protocols, which are recognized by KCC (Korea Construction Standards Center) for equivalence. The technical parameters include:

  • Integrity (E): Resistance to flame penetration and hot gases, verified via cotton pad ignition tests.
  • Insulation (I): Maximum temperature rise of ≤180°C on the unexposed side, ensuring safe egress.
  • Radiation (W): Control of radiant heat for EW-rated systems.

For Kimhae’s humid subtropical climate, the glass composition (e.g., 28mm EI60 panels with multi-layer tempered glass and intumescent gel) is designed to maintain stability under temperature fluctuations. These systems are installed with ceramic wool seals (density 210 kg/m³) and intumescent fire seals (20mm × 4mm) to prevent gap penetration, as per KBC Article 49. This ensures long-term reliability in high-occupancy facilities like the Gimhae National Museum.

Fire Rated Glass Grade Selection and Technical Parameters for Kimhae Climate Conditions

Selecting the appropriate fire resistance grade for Kimhae projects requires understanding local climate and building codes. The city’s high humidity and temperature variations (summer up to 35°C, winter down to -5°C) demand glazing systems that resist thermal stress without compromising fire performance. Antifires offers a range of certified options:

RatingTypical ApplicationGlass StructureKey Performance
E60Office partitions, egress corridors6mm single-layer temperedIntegrity 60 min
EI60Factory floor separations, stairwells28mm multi-layer with gelIntegrity 66 min; Insulation 64 min
EI120Chemical storage, hazardous zones50mm insulated compositeIntegrity 120 min; Insulation 120 min

For commercial complexes along the Nakdong River, 60-minute fire rated glass with insulation (EI60) is recommended to protect high-occupancy areas. The systems use G.M.S. hollow steel frames with M6/M8 anchor bolts at 300mm spacing, ensuring structural integrity during a fire. This technical precision aligns with KBC requirements for fire resistance structures, reducing approval delays for Kimhae developers.

Building Application Scenarios and Engineering Project Demands in Kimhae Industrial Zones

Kimhae’s industrial zones, including Juchon and Samjeong, are dominated by automotive parts manufacturing, logistics, and chemical processing facilities. These environments require fire-rated partitions and doors that can withstand prolonged exposure while maintaining compartmentation. For factory floor separations, Antifires supplies EI60-rated glazed systems that provide 66 minutes of integrity and 64 minutes of insulation, tested under BS EN 1364-1. In high-bay warehouses, 60-minute integrity-only (E60) glass is used for vision panels to monitor operations without compromising safety. For chemical storage units handling volatile materials, EI120-rated systems (e.g., 50mm multi-layer insulated glass) are mandatory, offering up to 120 minutes of insulation. These installations incorporate ceramic fiber-filled expansion gaps (3–5mm) and fire-rated insulation boards (12–15mm) to prevent heat transfer. The engineering demands of Kimhae’s logistics sector also require systems that resist deflection (maximum 38mm toward furnace) during fire tests, ensuring structural stability. Antifires’ solutions are tailored to these scenarios, providing documented compliance with KS F 2845 for local fire safety inspections.

Brand Advantages and Reasons for Kimhae Customers to Choose Antifires Fire Rated Systems

Kimhae customers benefit from Antifires’ strategic location—our Busan distribution hub ensures rapid delivery and on-site technical support within 24 hours. The brand’s competitive advantages include:

  • Certified Compliance: Test reports align with KBC, KS F 2845, and international standards (BS 476, ASTM E119), simplifying local authority approvals.
  • Durable Warranty: A 10-year warranty on fire rated glass integrity covers delamination and seal failures, reducing long-term liability for building owners.
  • Localized Engineering: Systems are pre-configured for Kimhae’s climate, with intumescent gel layers that resist humidity-induced degradation.
  • Comprehensive Support: From specification to installation, Antifires provides technical documentation, including furnace test data (Type K thermocouples, 9–12 channels) for verification.

For fire door systems, the company offers custom sizes with 26mm glazed door glass (5mm + 5.5mm gel + 5mm + 5.5mm gel + 5mm) that achieves 89–90 minutes integrity and 68 minutes insulation. This ensures that Kimhae’s commercial and industrial projects meet the highest safety standards while optimizing cost efficiency.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire rated glass fully complies with the Korean Building Code (KBC) for Kimhae construction projects. All systems are tested under recognized international standards (BS 476 Part 22, BS EN 1634-1, ASTM E119) that are accepted by the Korea Construction Standards Center (KCC) as equivalent to KS F 2845 and KS F 2257. The products meet KBC Article 49 requirements for fire resistance structures, providing integrity ratings from 30 to 120 minutes and insulation ratings up to 120 minutes. For each project, Antifires supplies certified test reports and installation documentation to streamline local authority approvals in Kimhae.

Antifires offers a comprehensive range of fire resistance ratings for doors and windows used in Kimhae industrial facilities. Available options include E60 (60-minute integrity), E90 (90-minute integrity), EI60 (60-minute integrity and insulation), and EI120 (120-minute integrity and insulation). For factory floor separations, EI60-rated systems with 28mm multi-layer glass (integrity 66 min, insulation 64 min) are recommended. For chemical storage zones, EI120-rated 50mm insulated composite glass provides up to 120 minutes of insulation. All ratings are verified under BS EN 1634-1 and ASTM E119 test conditions.

Yes, Antifires provides certified test reports for all fire rated glass systems, including furnace test data (Type K thermocouples, 9–12 channels) and unexposed surface monitoring results. These documents are recognized by Korean authorities for fire safety inspections in Kimhae. Additionally, Antifires offers local installation support from its Busan distribution hub, including on-site technical guidance for frame integration (G.M.S. hollow steel sections, ceramic wool seals) and expansion gap management (3–5mm ceramic fiber). This ensures full compliance with KBC and KS F 2845 during final inspection.