Pasto Fire Rated Glass Certified for Colombian Building Safety Standards

In the high-altitude urban environment of Pasto, Colombia, building safety compliance demands rigorous attention to passive fire protection systems. Antifires supplies certified fire rated glass, fire doors, and partition systems engineered to meet the stringent requirements of the Reglamento Colombiano de Construcción Sismo Resistente (NRS 10). This local standard, combined with international test protocols such as ASTM E119 and BS 476 Part 22, ensures that every glazed assembly provides verified performance for egress routes, compartment walls, and critical infrastructure. The NRS 10 code specifically mandates fire resistance ratings (RF) for building elements based on occupancy type and height, making certified products essential for municipal permit approvals in Pasto’s growing commercial and residential sectors. Antifires’ product portfolio includes integrity-only (E) and integrity plus insulation (EI) rated glass systems that undergo documented third-party testing to validate their performance under standard fire curves. These systems utilize multi-layer tempered glass with intumescent interlayers that activate during fire exposure, forming a protective barrier against flame penetration and radiant heat transfer. For detailed regulatory references, professionals can consult the official NRS 10 Title J document from Colombia’s Ministry of Housing to understand specific fire resistance requirements for glazed openings. By combining localized code knowledge with globally recognized test standards, Antifires delivers solutions that support both life safety and architectural flexibility in Pasto’s challenging seismic and climatic conditions.

Colombian NRS 10 Fire Resistance Requirements for Pasto Commercial Buildings

The Reglamento Colombiano de Construcción Sismo Resistente (NRS 10) establishes mandatory fire resistance ratings (RF) for commercial buildings in Pasto, particularly for egress routes and compartment walls. Table J.3.2-1 of this code specifies that glazed openings in fire-resistance-rated assemblies must meet integrity and insulation criteria based on the building’s height and occupancy classification. For Pasto’s commercial structures, RF-60 (60 minutes) and RF-120 (120 minutes) are commonly required for stairwell enclosures and corridor partitions. Antifires’ fire rated glass products are engineered to comply with these classifications through documented testing per ASTM E119 and BS EN 1634-1. The multi-layer construction, featuring tempered glass panes bonded with intumescent gel, ensures that the assembly maintains its structural integrity during fire exposure while limiting temperature rise on the unexposed side. For example, the 28mm EI60 panel achieves an integrity rating of 66 minutes and an insulation rating of 64 minutes, aligning closely with NRS 10 requirements for 60-minute rated assemblies. In Pasto’s high-altitude urban setting, where lower atmospheric pressure can affect fire dynamics, these certified performance values provide building officials and specifiers with reliable data for permit approvals. The frame systems utilize G.M.S. hollow steel sections with ceramic wool and intumescent seals to maintain the assembly’s fire resistance at the perimeter. Contractors working on projects in Pasto’s historic district or new construction zones can reference these test results to demonstrate compliance with local building codes during municipal inspections.

Selecting Fire Rated Glass Integrity and Insulation Ratings for Pasto’s Climate

Selecting the appropriate fire rated glass rating for Pasto’s climate and regulatory environment requires understanding the distinction between integrity (E) and insulation (I) performance. Integrity-only rated glass, such as the 6mm E90 product tested to BS 476 Part 22, prevents flame penetration and hot gas passage for up to 90 minutes but does not limit temperature rise on the unexposed side. This is suitable for applications where radiant heat control is not critical, such as vision panels in fire doors located in non-egress areas. For projects requiring both flame containment and thermal protection, EI-rated systems like the 50mm EI120 assembly provide verified insulation performance with a maximum temperature rise of 180°C and an average rise of 140°C on the unexposed surface. Pasto’s building authorities in Nariño department enforce strict adherence to NRS 10 Table J.3.2-1, which may mandate EI ratings for glazed openings in healthcare facilities, educational buildings, and high-occupancy commercial spaces. The fire door systems supplied by Antifires undergo testing per NFPA 252 and BS EN 1634-1, providing documented verification for municipal permit approvals. The following table summarizes key performance characteristics for common ratings:

Rating Integrity (Minutes) Insulation (Minutes) Typical Application
E60 60 N/A Stairwell vision panels
EI60 66 64 Corridor partitions
EI120 120 120 Compartment walls

For projects requiring specific performance levels, Antifires offers 120-minute fire rated glass systems that combine integrity and insulation for maximum protection. The selection process should consider the building’s occupancy type, egress path requirements, and local fire department recommendations to ensure compliance with both national and municipal codes.

Fire Rated Glass Applications in Pasto’s Healthcare and Educational Infrastructure

Healthcare and educational facilities in Pasto present unique fire safety challenges due to their high occupancy levels and the presence of vulnerable populations. The NRS 10 code mandates enhanced fire resistance ratings for these building types, often requiring RF-120 for compartment walls and RF-60 for corridor enclosures. Antifires provides fire partition solutions specifically engineered for these applications, using multi-layer glass assemblies that maintain both integrity and insulation under standard fire exposure. For hospital operating rooms and patient wards, the 50mm EI120 system offers verified performance with an integrity rating of 120 minutes and insulation rating of 120 minutes, ensuring that fire and heat are contained within the compartment of origin. In educational buildings such as schools and universities in Pasto, glazed partitions in stairwells and corridors must meet RF-60 requirements to protect evacuation routes. The 28mm EI60 panel, with an integrity rating of 66 minutes and insulation rating of 64 minutes, provides a safety margin above the minimum requirement while allowing natural light transmission for occupant comfort. These systems incorporate intumescent interlayers that activate at approximately 120°C, expanding to form a rigid insulating barrier that prevents flame spread and limits radiant heat transfer. The frame assemblies use ceramic wool with a density of 210 kg/m³ and intumescent seals measuring 20mm × 4mm to maintain the fire barrier at the perimeter. For projects requiring radiation control, the EW120 rating ensures that radiant heat transmission is limited to safe levels, protecting occupants in adjacent spaces during evacuation. Contractors working on healthcare and educational infrastructure in Pasto can specify these certified systems with confidence, knowing they meet both NRS 10 requirements and international test standards.

Antifires Localized Support and Certification Advantages for Pasto Contractors

Antifires offers comprehensive localized support for contractors and specifiers in Pasto, ensuring that fire rated glass systems are correctly selected and installed for compliance with NRS 10 requirements. Each product shipment includes detailed installation documentation referencing the original test reports, which specify frame types, sealant materials, and fixing methods. The certified test conditions recorded during evaluation include ambient temperatures ranging from 27°C to 36°C and relative humidity levels between 43% and 90%, reflecting conditions similar to Pasto’s high-altitude climate. For projects requiring custom sizes or configurations, Antifires provides technical drawings and installation guidance to ensure that the assembly maintains its fire resistance rating. The frame systems utilize G.M.S. hollow steel sections with expansion gaps of 3mm to 5mm filled with ceramic fiber, accommodating thermal movement during fire exposure. Fixing anchors (M6 or M8) are installed at 300mm to 600mm spacing to secure the assembly to the building structure. For contractors working on fire rated glass doors, the 26mm door glass assembly with integrity ratings of 89–90 minutes and insulation ratings of 68 minutes provides documented performance for egress door applications. Antifires also offers on-site training sessions for installation teams in Pasto, covering proper handling of intumescent seals, ceramic wool placement, and frame alignment to prevent thermal bridging. The certification documentation includes test reports from accredited laboratories, providing building officials with verifiable evidence of compliance during permit reviews. By combining certified products with localized technical support, Antifires enables Pasto contractors to deliver fire-safe glazing solutions that meet the highest standards of performance and reliability.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires provides fire rated glass systems that are tested to international standards such as ASTM E119 and BS 476 Part 22, which are recognized by Colombian building authorities for compliance with NRS 10 seismic and fire resistance codes. For high-altitude buildings in Pasto, where lower atmospheric pressure can influence fire dynamics, the certified performance data from these tests provides reliable verification. Products like the 28mm EI60 panel, with an integrity rating of 66 minutes and insulation rating of 64 minutes, align with NRS 10 requirements for RF-60 rated assemblies. The multi-layer construction with intumescent interlayers ensures that the glass maintains its structural integrity during fire exposure, even in Pasto’s unique environmental conditions. All test reports are available for review by local building officials during the permit approval process.

Typical lead time for custom fire rated glass and door systems delivered to Pasto ranges from 4 to 8 weeks, depending on the complexity of the assembly and the specific rating required. Antifires offers on-site installation guidance through detailed technical documentation and remote support from qualified engineers. For complex projects, a site visit can be arranged to verify frame conditions, expansion gap requirements, and sealant application. The installation team receives documentation specifying the exact frame types, ceramic wool densities (210 kg/m³), and intumescent seal dimensions (20mm × 4mm) used during the original certification testing. This ensures that the installed assembly maintains its fire resistance rating as documented in the test reports.

Yes, Antifires can supply EI 60 fire rated glass systems that are designed for retrofit installation into existing window frames in Pasto’s historic buildings. The 28mm EI60 panel, with an integrity rating of 66 minutes and insulation rating of 64 minutes, can be fabricated to fit existing openings without requiring major structural modifications. The frame system uses G.M.S. hollow steel sections with expansion gaps of 3mm to 5mm filled with ceramic fiber, accommodating thermal movement while maintaining the fire barrier. For historic buildings, Antifires offers 60-minute fire rated glass systems that can be customized to match existing sightlines and profiles, preserving the architectural character while enhancing fire safety compliance with NRS 10 requirements.