Poughkeepsie Fire Rated Glass Certified for New York State Building Code Compliance

Poughkeepsie commercial construction projects must comply with the 2020 New York State Uniform Fire Prevention and Building Code (BC), which adopts the International Building Code (IBC) as its foundation. For fire-rated glazing, this means assemblies must meet rigorous fire endurance standards such as ASTM E119 and UL 263. Antifires supplies fire-rated glass and door systems that are certified to these standards, providing integrity ratings from 45 to 120 minutes for critical applications in egress corridors, vertical openings, and fire barriers. These products are engineered to maintain compartmentation and prevent flame spread, aligning with the specific fire resistance requirements enforced by Poughkeepsie code officials and the Dutchess County fire marshal. By integrating certified assemblies, architects and contractors can ensure local code adherence while achieving design flexibility. For detailed regulatory guidance, refer to the New York State Department of State’s Code Enforcement page. Explore Antifires’ range of 90-minute fire rated glass for corridor and stairwell applications.

Adhering to Poughkeepsie Fire Resistance Requirements Under New York State Uniform Code

Poughkeepsie enforces the 2020 New York State Uniform Fire Prevention and Building Code, which mandates fire-rated assemblies in commercial egress corridors, vertical openings, and hazardous areas. The code requires that glazing in these locations meet specific fire resistance ratings based on occupancy and building height. Antifires products are tested to ASTM E119 and UL 263, providing verified fire endurance for 45-, 60-, 90-, and 120-minute ratings. For instance, in a three-story mixed-use building on Market Street, corridor partitions must achieve a minimum 60-minute integrity rating to protect egress paths. The systems utilize G.M.S. hollow steel frames with intumescent seals and ceramic wool to maintain structural stability under furnace conditions, with maximum deflection controlled within 38–152 mm during testing. This ensures compliance with local fire marshal requirements for third-party labeling under NFPA 80. For high-demand applications, consider 120-minute fire rated glass with insulation for enhanced thermal protection.

Fire Rated Glass Performance Specifications for Poughkeepsie’s Mixed-Use and Institutional Structures

Local fire marshals in Dutchess County mandate third-party labeling for fire-rated glazing in schools and healthcare facilities under NFPA 80. Antifires systems carry UL listing marks, which are recognized by Poughkeepsie code officials for plan review and final inspection. The glass structures are engineered with multi-layer composites, such as the 28mm EI60 panel (6mm + 5.5mm gel + 5mm + 5.5mm gel + 6mm), which achieves integrity for 66 minutes and insulation for 64 minutes under BS EN 1634-1 conditions. For institutional projects like Poughkeepsie Middle School, corridor partitions require both integrity and insulation to limit heat transfer to unexposed sides (maximum average rise of 140°C). The assemblies include ceramic tape (3–6mm, density 210 kg/m³) and expansion gaps (3–5mm) to accommodate thermal movement, ensuring reliable performance during a fire event. These technical specifications provide architects with confidence in meeting stringent local codes for occupant safety.

Poughkeepsie Building Application Scenarios: Retrofits, Schools, and Transit-Oriented Developments

Poughkeepsie’s building stock includes historic downtown retrofits, modern schools, and transit-oriented developments near the Metro-North station. For historic building retrofits, such as the conversion of a 19th-century warehouse on Main Street, fire-rated glazing must preserve sightlines while meeting egress requirements. Antifires 10mm FPOS glass (3mm float + 4mm gel + 3mm float) provides integrity for 135 minutes, suitable for stairwell enclosures in adaptive reuse projects. In school settings, like Arlington High School, corridor partitions require 60-minute integrity with insulation to protect students during evacuation. The 26mm door glass (5mm + 5.5mm gel + 5mm + 5.5mm gel + 5mm) achieves integrity for 89–90 minutes and insulation for 68 minutes, ideal for classroom doors. For transit-oriented developments near the Poughkeepsie train station, 60-minute fire rated glass with insulation is used in lobby partitions to balance aesthetics with fire safety. Each scenario requires careful selection of rating and glass type to align with local fire marshal expectations.

Why Poughkeepsie Architects and Contractors Trust Antifires for Fire Rated Assemblies

Poughkeepsie architects and contractors trust Antifires for fire-rated assemblies due to consistent third-party certification and localized technical support. All products are tested to BS 476 Part 22, BS EN 1634-1, and ASTM E119, ensuring compliance with New York State codes. The systems feature G.M.S. hollow steel frames with intumescent fire seals (20mm × 4mm) and ceramic wool to prevent flame penetration, with anchor bolt spacing at 300–600mm for secure installation. For complex projects, such as the Poughkeepsie Civic Center renovation, the 50mm EI120 glass provides integrity and insulation for 120 minutes, meeting requirements for vertical openings in high-occupancy buildings. The team offers pre-installation guidance on expansion gaps and frame reinforcement, reducing on-site errors. This reliability, combined with UL listing marks recognized by Dutchess County officials, makes Antifires a preferred partner for fire-rated glazing in Poughkeepsie’s commercial and institutional sectors.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire rated glass meets the specific fire testing requirements for Poughkeepsie commercial buildings under the New York State Building Code. The products are tested to ASTM E119 and UL 263, which are the referenced standards for fire endurance in the 2020 New York State Uniform Fire Prevention and Building Code. Assemblies such as the 21mm FPOS glass (integrity 120 min, insulation 30 min) and 28mm EI60 panels (integrity 66 min, insulation 64 min) provide verified performance for egress corridors and vertical openings. These systems carry UL listing marks, ensuring they are accepted by Poughkeepsie code officials and the Dutchess County fire marshal for plan review and final inspection.

For Poughkeepsie school corridor partitions and stairwells, a fire resistance rating of 60 minutes with insulation (EI60) is typically required under the New York State Building Code, based on IBC Chapter 10 for egress and Chapter 7 for fire-resistance-rated construction. Antifires offers the 28mm EI60 panel, which achieves integrity for 66 minutes and insulation for 64 minutes, limiting heat transfer to unexposed sides (maximum average rise of 140°C). This rating ensures safe evacuation during a fire event, meeting the requirements of local fire marshals in Dutchess County for educational occupancies.

Yes, Antifires can provide UL-listed fire rated door and window assemblies for historic building retrofits in Poughkeepsie’s downtown district. The systems are designed to integrate with existing structures, using G.M.S. hollow steel frames and ceramic wool to maintain fire integrity without compromising architectural aesthetics. For example, the 10mm FPOS glass (integrity 135 min) is suitable for stairwell enclosures in adaptive reuse projects, such as converting 19th-century warehouses on Main Street. These assemblies meet ASTM E119 standards and are recognized by Poughkeepsie code officials, ensuring compliance with fire safety requirements while preserving historic character.