Sivas Fire Rated Glass Solutions – Certified for Turkish Building Safety Standards

In the evolving landscape of Turkish building safety, Sivas presents unique challenges for fire protection engineering. Antifires delivers certified fire rated glass and complete glazed systems that align with both the Turkish Fire Protection Regulation (BYKHY) and European test standards. The BYKHY, which references EN 1363 series for fire resistance testing, mandates strict performance criteria for all commercial and industrial projects in Sivas. Additionally, given the region's proximity to active fault lines such as the North Anatolian Fault, all glazed assemblies must demonstrate structural integrity under seismic loads. Antifires ensures compliance by engineering systems that pass rigorous furnace tests per TSE standards while maintaining deflection control and anchorage stability. From integrity-only E-class products for egress corridors to fully insulated EI120 systems for high-risk zones, the portfolio covers every application. By integrating certified intumescent interlayers and steel framing, these solutions provide verified fire separation without compromising architectural transparency. Sivas architects and contractors can rely on documented test reports to streamline municipal approvals and enhance life safety in hospitals, schools, and government buildings.

Navigating Sivas Building Fire Safety Codes: EN 1363 and Turkish Seismic Compliance

Sivas building projects must comply with the Turkish Fire Protection Regulation (BYKHY), which adopts EN 1363 as the benchmark for fire resistance testing. This framework requires all non-loadbearing glazed assemblies to demonstrate integrity (E) and, where specified, insulation (I) under standardized furnace conditions. For Sivas, an additional layer of complexity arises from seismic design requirements. The region falls within seismic zone 1, demanding that fire-rated systems accommodate lateral movement without losing fire integrity. Antifires addresses this by using G.M.S. hollow steel frames with M8 anchor bolts spaced at 300–600 mm, combined with ceramic wool expansion gaps of 3–5 mm. These details ensure that the glazing system can withstand structural drift while maintaining its fire barrier function. Test data from BS EN 1634-1 and BS 476 Part 22 confirms that such assemblies achieve integrity ratings from 60 to 120 minutes, even under dynamic loading simulations. By aligning with both EN 1363 and local seismic codes, Antifires provides a compliant solution that simplifies permitting for Sivas’s new developments and retrofits.

Selecting Fire Rated Glass for Sivas Climate: EN 13501 Classifications and Thermal Performance

For Sivas’s continental climate, which features harsh winters and hot, dry summers, selecting the correct fire-rated glazing involves evaluating both fire resistance and thermal performance. Antifires offers products classified under EN 13501-2, ranging from EI30 to EI120, which combine fire integrity with thermal insulation. This is critical because standard monolithic glass can cause significant heat loss, increasing energy costs for industrial facilities and municipal buildings. The EI-rated systems use multi-layer structures—such as the 28 mm EI60 panel (6 mm glass + 5.5 mm gel + 5 mm glass + 5.5 mm gel + 6 mm)—which provide a low U-value while preventing flame and heat transfer for up to 120 minutes. During testing, the unexposed side average temperature rise remains below 140°C, meeting the insulation criterion. For projects requiring additional energy efficiency, Antifires can integrate low-emissivity coatings without compromising fire performance. This dual functionality makes these systems ideal for Sivas’s hospitals, schools, and government offices, where occupant safety and operational efficiency are equally prioritized. Contractors benefit from documented EN 13501 classifications that satisfy local energy code requirements.

Sivas Application Demands: Fire Rated Glass in Historic Renovations and New Industrial Parks

Sivas’s urban development encompasses two distinct project typologies: the sensitive restoration of historic landmarks and the rapid construction of new industrial parks. For heritage structures like the Sivas Congress Museum, Antifires provides slim-profile fire rated glass systems that preserve original architectural aesthetics. The 10 mm FPOS glass (3 mm float + 4 mm fire gel + 3 mm float) achieves 135 minutes of integrity while maintaining a narrow sightline, allowing it to be discreetly integrated into existing timber or steel frames. This solution meets the BYKHY requirements for protected escape routes without altering the building’s historic character. Conversely, for new industrial zones near the Sivas Organized Industrial Zone, robust fire doors and partition walls are essential. Here, Antifires specifies the 50 mm EI120 glazed system, which delivers both integrity and full insulation for 120 minutes. These assemblies are installed using fire-rated insulation boards (12–15 mm) and intumescent seals (20 mm × 4 mm) to ensure compartmentation in high-risk areas. By offering tailored solutions for both restoration and new-build contexts, Antifires enables Sivas developers to achieve code compliance without compromising design intent.

Why Sivas Contractors Trust Antifires for Localized Fire Protection and Fast Delivery

Sivas contractors and specifiers choose Antifires for verified compliance and logistical efficiency. All products carry TSE (Turkish Standards Institution) certification and EN 16034 declarations of performance, which are directly accepted by Sivas municipal building control departments. This eliminates delays during permit reviews. The technical documentation includes full test reports from accredited laboratories, detailing furnace pressure conditions (0 ±2 Pa), thermocouple placements (9–12 channels), and failure modes such as cotton pad ignition or sustained flaming. For on-ground support, Antifires operates through a distributor network in Central Anatolia, ensuring rapid lead times for both standard and custom assemblies. Delivery typically includes pre-assembled frames with ceramic wool and intumescent seals, reducing installation errors. On-site technical assistance covers frame alignment, expansion gap verification, and anchor bolt spacing to match test conditions. This localized service model is particularly valuable for Sivas’s remote industrial sites, where access to specialized fire protection expertise may be limited. By combining certified products with regional support, Antifires helps Sivas projects achieve safety and schedule certainty.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire rated glass systems are designed to comply with Turkish seismic building codes applicable to Sivas. The region’s location in seismic zone 1 requires that all glazed assemblies maintain fire integrity during and after earthquake-induced movement. Antifires addresses this by using G.M.S. hollow steel frames anchored with M8 bolts at 300–600 mm spacing, combined with 3–5 mm expansion gaps filled with ceramic fiber. These details allow the frame to accommodate lateral drift without compromising the fire barrier. Test data from BS EN 1634-1 confirms that such assemblies retain their integrity rating (E60 to E120) under simulated dynamic conditions. Additionally, all products are certified under TSE standards and EN 16034, providing the documentation needed for Sivas building permit approvals. Contractors can request seismic compliance reports specific to their project’s design loads.

For Sivas’s cold-climate industrial buildings, Antifires recommends EI60 or EI120 classified fire rated glass for fire doors. The EI classification ensures both integrity (E) and thermal insulation (I), which is critical in preventing heat loss through the glazing during winter months. The 28 mm EI60 panel, for example, provides 66 minutes of integrity and 64 minutes of insulation, while maintaining a low U-value that reduces energy costs. For higher-risk zones such as chemical storage or production areas, the 50 mm EI120 system delivers full insulation for 120 minutes, meeting the strictest compartmentation requirements. These products are tested per EN 13501-2 and carry TSE certification, making them suitable for Sivas’s industrial applications. Antifires can also provide thermal performance data to support energy modeling for new facilities.

Antifires simplifies EN 1363 certification documentation for Sivas building permit applications by providing complete technical files. Each product shipment includes a declaration of performance (DoP) per EN 16034, which directly references the EN 1363 furnace test methodology. The documentation covers test conditions—such as furnace temperature curves, pressure differentials (0 ±2 Pa), and thermocouple placement—along with certified results for integrity and insulation. For Sivas projects, Antifires also supplies TSE conformity certificates and, where required, seismic compliance reports. The technical team can prepare a project-specific submittal package that aligns with the Turkish Fire Protection Regulation (BYKHY) requirements. This includes frame specifications, sealant types (ceramic wool, intumescent strips), and anchoring details. Contractors can request these documents during the quotation phase to ensure smooth municipal approvals.