Szczecin Fire Rated Glass: Certified Solutions for Polish Building Safety Compliance

In the evolving landscape of Polish construction safety, Szczecin's architectural and engineering community demands fire-rated glazing solutions that rigorously align with both national and European regulatory frameworks. As a port city with a unique mix of historic tenements, modern high-rises, and industrial logistics hubs, the city requires fire rated glass systems that are not only certified but also adaptable to local climatic and structural conditions. Antifires provides fully tested assemblies that comply with the Polish PN-B-02878 standard and the European PN-EN 13501-2 fire classification system, ensuring that every installation meets the required EI (Integrity and Insulation) ratings. These standards mandate specific performance thresholds for preventing fire spread and limiting heat transfer, which are critical for the safety of mixed-use developments and port-adjacent industrial zones. By integrating certified test data from standards such as BS EN 1634-1 and BS 476 Part 22, Antifires guarantees that its products deliver verified performance under controlled furnace conditions. For comprehensive regulatory guidance, professionals can reference the official documentation provided by the Instytut Techniki Budowlanej (ITB), Poland's primary building research institute. This localized approach ensures that every glazed system—from fire rated glass doors to expansive partition walls—is engineered for uncompromised safety and full legal compliance in Szczecin.

Adapting Fire Rated Glass to Szczecin’s Local Building Regulations and PN-B Standards

Szczecin’s construction sector must navigate a dual-layered compliance landscape, adhering to both the national PN-B-02878 standard and the pan-European PN-EN 13501-2 classification. Antifires addresses this by supplying fire-rated glazing systems that have been rigorously tested to deliver precise EI (Integrity and Insulation) performance, which is particularly critical for the city's mixed-use developments and industrial zones near the Oder River. The local adaptation involves matching the glass assembly’s fire resistance duration—typically EI 30 to EI 120—to the specific fire compartmentation requirements outlined in Polish building permits. For example, a commercial tower in the city center may require a 60-minute insulation barrier to protect escape routes, while a logistics warehouse in the port area might need a higher integrity rating to contain a potential fire in a high-rack storage area. Antifires ensures that each system, whether using a 10mm FPOS or a 28mm EI60 panel, is installed with the correct frame and sealant specifications—such as G.M.S. hollow steel sections and intumescent fire seals (20mm × 4mm)—to maintain the certified fire resistance. This meticulous alignment with local regulations guarantees that projects in Szczecin achieve both safety and regulatory approval without compromise.

Selecting Fire Rated Glass Grades for Szczecin’s Climate and Structural Demands

The coastal climate of Szczecin, characterized by high humidity and frequent temperature fluctuations, imposes specific demands on fire-rated glazing systems. Antifires addresses these challenges by offering fire rated glass with EI 30 to EI 120 classifications that incorporate enhanced thermal stability features. The products, including laminated and insulated glass units (IGUs), are designed to meet the Polish PN-EN 1279 standard for durability and condensation resistance. This is particularly vital for high-rise residential and commercial towers where thermal bridging and moisture ingress can compromise both performance and aesthetics. The multi-layer structure of the glass, such as the 21mm FPOS assembly (multi-layer composite insulated fire-resistant glass), provides not only fire integrity but also effective thermal insulation, reducing the risk of condensation on the unexposed face during cold winters. Furthermore, the use of ceramic wool (3mm–6mm, density 210 kg/m³) as perimeter insulation within the G.M.S. hollow steel frames ensures that the entire system maintains its fire-rated performance despite the structural movements induced by temperature changes. For projects requiring enhanced environmental control, Antifires supplies 50mm/54mm ultra-high-performance glass systems that achieve up to 120 minutes of insulation, making them ideal for envelope applications in Szczecin’s demanding coastal environment.

Addressing Fire Safety in Szczecin’s Historic Districts and Modern Port Infrastructure

Szczecin’s architectural identity is defined by its contrasting landscapes: the historic Old Town with its carefully preserved facades and the modern port infrastructure with its large-scale logistics centers. For heritage renovation projects, Antifires provides fire-rated glazing solutions that deliver 60-minute integrity without altering the original visual character of the building. These systems, often utilizing 6mm E90 glass or 8mm glass systems, can be discreetly integrated into existing timber or steel frames, using 3mm–5mm expansion gaps filled with ceramic fiber to accommodate structural movement while maintaining a fire seal. This non-intrusive approach is critical for projects under the supervision of the local conservator of monuments. Conversely, for new port logistics hubs and industrial facilities, the focus shifts to robust fire compartmentation. Antifires supplies fire partition solutions that comply with stricter evacuation route regulations, often requiring EI 60 or EI 120 ratings to protect egress paths in large, open-plan spaces. These systems, such as the 26mm glazed door glass or 28mm EI60 panels, are installed with M6/M8 anchor bolts at 300–600mm spacing to ensure structural stability under fire load. By offering tailored solutions for both heritage sensitivity and industrial robustness, Antifires ensures that every project in Szczecin meets its specific fire safety and architectural goals.

Why Szczecin Architects and Developers Trust Antifires for Certified Fire Protection

The trust that Szczecin’s architects and developers place in Antifires is built on a foundation of verifiable certification and localized expertise. All fire rated glass systems are CE-marked and have been tested by Polish accredited laboratories, including the Instytut Techniki Budowlanej (ITB), ensuring full compliance with the EU Construction Product Regulation (CPR). This documented compliance is critical for securing building permits and insurance approvals in the city. Beyond certification, Antifires offers on-site technical consultations in Szczecin, allowing engineers to assess specific project conditions—such as the structural load of a 50mm ultra-high-performance glass assembly or the integration of intumescent fire seals into existing frames. With over a decade of export experience to Eastern Europe, the company understands the nuances of local building materials and installation practices. For example, the team can advise on the correct use of fire-rated insulation boards (12mm–15mm) within the framing system to achieve the required EI 60 or EI 120 performance. This combination of certified products, regulatory knowledge, and hands-on support makes Antifires a reliable partner for complex projects, from high-rise towers in the city center to specialized facilities in the port area. For a comprehensive range of certified options, explore the 120-minute fire rated glass solutions designed for demanding applications.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, all Antifires fire rated glass systems are tested to meet the fire resistance requirements specified in the Polish PN-B-02878 standard and are classified under PN-EN 13501-2. For commercial buildings in Szczecin, this typically translates to achieving specific EI (Integrity and Insulation) ratings, such as EI 30, EI 60, or EI 120, depending on the building's fire compartmentation plan. Our products, including the 28mm EI60 panel and the 50mm EI120 system, have been tested under controlled furnace conditions (up to 135 minutes) to verify their performance. We provide full documentation, including test reports from accredited labs, to support your compliance with local building codes.

Antifires provides comprehensive compliance documentation to support building permit applications in Szczecin. This includes CE Declarations of Performance (DoP) for all fire rated glass systems, along with classification reports from Polish accredited laboratories such as the Instytut Techniki Budowlanej (ITB). Our technical team can also assist in preparing a project-specific compliance dossier that outlines the fire resistance ratings (e.g., EI 60 or EI 120), installation specifications (frame type, sealant, anchoring), and relevant test standards (e.g., BS EN 1634-1). This ensures that your application meets all requirements of the EU Construction Product Regulation (CPR) and local Polish regulations.

Absolutely. Antifires specializes in supplying fire rated glass with customized dimensions to fit historic window frames, a common requirement for renovation projects in Szczecin’s Old Town. Our systems, such as the 6mm E90 glass or 10mm FPOS, can be fabricated to non-standard sizes while maintaining their certified fire resistance. The installation process uses ceramic fiber expansion gaps (3mm–5mm) and intumescent seals to ensure a proper fit without compromising the original facade. We work closely with your team to provide the exact dimensions and frame integration details, ensuring both fire safety and heritage preservation.