Certified Fire Rated Glass Solutions for Cali Colombia Building Compliance

In the rapidly expanding urban landscape of Cali, Colombia, building fire safety compliance is governed by the stringent requirements of NSR-10 (Reglamento Colombiano de Construcción Sismo Resistente), specifically Título J, which mandates the use of certified passive fire protection systems. For commercial architects and contractors, specifying fire rated glass that meets these local regulations is critical for ensuring safe egress routes and compartmentation. Antifires provides fully certified glazing solutions that align with Decreto 1077 de 2015, which outlines urban development and building safety protocols. These systems are rigorously tested to international standards such as BS EN 1634-1 and ASTM E119, ensuring that every glazed partition, door, or window maintains structural integrity under fire exposure. By integrating certified fire-rated glass into commercial projects, stakeholders in Cali can achieve both aesthetic transparency and uncompromised life safety, while adhering to the mandatory fire resistance ratings required for high-occupancy buildings. For further reference on local fire safety codes, consult the official Colombian regulatory documentation at Ministerio de Vivienda, Ciudad y Territorio.

Cali Building Fire Safety Compliance Under NSR-10 and Local Decreto 1077

Compliance with NSR-10 Título J and Decreto 1077 de 2015 in Cali requires that commercial buildings, particularly high-rises along corridors like Avenida 3N and Avenida 6N, incorporate fire-resistant glazing in designated egress routes and compartment walls. These regulations mandate specific fire resistance levels (FRL) for elements that separate fire zones or protect escape paths. For instance, glazed partitions in stairwell enclosures and exit corridors often require a minimum of E60 (integrity for 60 minutes) or EI60 (integrity and insulation for 60 minutes) to prevent flame and heat transfer. The use of fire door systems with certified insulation ratings is particularly important in Cali’s mixed-use towers, where dense occupancy demands extended evacuation times. Test data from BS 476 Part 22 confirms that properly framed assemblies using intumescent seals and ceramic wool can maintain integrity for up to 135 minutes, directly supporting the localized requirement for robust passive fire protection in high-risk vertical developments.

Selecting Fire Rated Glass EI Classifications for Cali’s Tropical Climate

Selecting the correct EI classification for fire rated glass in Cali requires careful consideration of the city’s tropical climate, which features high humidity and temperature fluctuations. For mixed-use developments near Avenida 3N, where retail spaces coexist with residential units, glazed partitions must provide both integrity and insulation to prevent radiant heat from compromising adjacent safe zones. The EI60 rating, as defined by BS EN 1364-1, ensures that the unexposed side’s average temperature rise does not exceed 140°C, a critical factor in maintaining tenable conditions during evacuation. Antifires’ 28mm EI60 panels, constructed with multi-layer tempered glass and intumescent gel, deliver verified performance with integrity lasting 66 minutes and insulation lasting 64 minutes. This performance is essential for glazed systems installed near evacuation routes, where the structural stability of the glass must remain intact despite thermal stress. For projects requiring higher performance, fire partition solutions with EI120 ratings provide dual protection for up to 120 minutes, suitable for critical infrastructure and high-occupancy commercial centers.

Fire Rated Glass Applications in Cali’s Commercial and Hospitality Sectors

In Cali’s commercial and hospitality sectors, fire rated glass is deployed in a variety of high-traffic applications, including hotel lobbies, conference centers, and retail atriums. These environments demand transparency for design continuity while meeting strict fire safety codes under NSR-10. For example, in a hotel near the Cali River, glazed partitions separating the lobby from the restaurant must maintain E90 integrity to prevent smoke migration, as verified by BS 476 Part 22 tests on 6mm glass systems. Similarly, in office towers along Avenida 4N, EI60 rated glass is used for internal corridor partitions to ensure that fire does not spread between tenancies. The use of 26mm door glass, which provides 89 minutes of integrity and 68 minutes of insulation, is common in these settings, offering robust protection without sacrificing visibility. Antifires’ certified solutions support these applications by providing frames with ceramic wool and intumescent seals, ensuring that the entire assembly—not just the glass—performs reliably under fire conditions.

Antifires Localized Supply and Technical Support for Cali Contractors

Antifires provides localized supply and technical support tailored to Cali contractors, ensuring that fire rated glass systems are specified, delivered, and installed in full compliance with NSR-10 and Decreto 1077. The company offers comprehensive documentation, including test certificates from BS EN 1634-1 and ASTM E119, which are accepted by local building authorities for plan approval and final inspection. For projects involving fire rated glass in exterior windows, Antifires provides assemblies with expansion gaps filled with ceramic fiber and frames treated for corrosion resistance, addressing Cali’s humidity challenges. Technical support includes on-site consultation for framing, sealant selection, and anchor bolt spacing (300–600mm as per test standards), ensuring that installation mirrors the certified test conditions. This localized approach reduces compliance risk for contractors and accelerates project timelines, making Antifires a reliable partner for Cali’s growing commercial construction market.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Antifires ensures compliance with Cali’s NSR-10 fire safety requirements by providing fire rated glass that is tested to international standards such as BS EN 1634-1 and ASTM E119. Each product is accompanied by certified test reports that document integrity (E) and insulation (I) performance, which are directly aligned with the fire resistance levels mandated by Título J of NSR-10. The company also verifies that all framing, seals, and installation methods—such as the use of ceramic wool and intumescent seals—match the configurations used during official testing. This ensures that the installed system performs as certified, meeting the localized requirements of Decreto 1077 de 2015 for commercial buildings in Cali.

For glazed partitions in Cali’s commercial office buildings, a fire resistance rating of E60 or EI60 is typically required, depending on the building’s occupancy classification and egress route design. Under NSR-10 Título J, partitions separating fire compartments or protecting exit corridors must provide at least 60 minutes of integrity to prevent flame and smoke spread. In higher-risk areas, such as stairwell enclosures or near fire escapes, an EI60 rating is often specified to also limit heat transfer, ensuring safe evacuation. Antifires offers certified 28mm EI60 panels that meet these performance criteria, providing both integrity (66 minutes) and insulation (64 minutes) as verified by BS EN 1364-1 testing.

Yes, Antifires provides certified fire rated glass suitable for both interior doors and exterior windows in Cali’s high-humidity climate. The glass assemblies are constructed with multi-layer tempered glass and intumescent gels that are resistant to moisture-related degradation. For exterior applications, the frames are treated with corrosion-resistant coatings and sealed with ceramic wool to prevent water ingress, while maintaining fire resistance ratings up to EI120. All products are tested under conditions that include ambient temperatures of 27°C–36°C and relative humidity up to 90%, simulating Cali’s tropical environment. This ensures reliable performance in both interior and exterior installations, fully compliant with NSR-10 and Decreto 1077.