Cyprus Fire Rated Glass Certified for Local Building Code Compliance and Safety

In the Republic of Cyprus, the regulatory framework for passive fire protection is defined by the Fire Safety Code of Cyprus (2016), which aligns closely with European classification standards such as EN 13501-2. For glazed assemblies, the governing test protocols include BS EN 1364-1 (non-loadbearing walls) and BS EN 1634-1 (door assemblies). Antifires supplies certified fire-rated glass systems that meet these stringent requirements, providing performance ratings from EI 30 to EI 120 for integrity and insulation. These systems are critical for compartmentation in high-rise buildings in Nicosia, coastal hotels in Limassol, and commercial developments near Larnaca. The Cyprus national code mandates that escape routes, stairwell enclosures, and fire-resisting partitions use materials with verified fire resistance, often requiring third-party testing to European standards. Antifires products, including fire-rated glass for doors and partitions, are tested under controlled furnace conditions (ambient 27°C–36°C, Type K thermocouples) to ensure compliance. For detailed regulatory references, the Cyprus Fire Service publishes official guidelines, accessible via the Ministry of Interior – Fire Safety Code. This localized approach ensures that architects, contractors, and specifiers receive products that meet both European certification and national building permit requirements.

Cyprus National Fire Safety Code Requirements for Passive Fire Protection Systems

The Fire Safety Code of Cyprus (2016) requires that all passive fire protection systems used in commercial and residential buildings achieve a minimum classification in accordance with EN 13501-2. For glazed elements, this means adherence to either integrity-only (E) or integrity-plus-insulation (EI) ratings. Antifires products are tested to BS EN 1364-1:1999/2015 and BS EN 1634-1:2008/2014, ensuring acceptance by local building control authorities. In high-rise structures in Nicosia, compartment walls often require EI 60 or EI 120 performance to limit fire spread and maintain structural stability. The code also specifies that escape route glazing must control radiant heat transmission, a requirement addressed by Antifires’ EW120 rated systems. For coastal projects in Limassol, where humidity levels during testing range from 43% to 90%, the intumescent gel layers in Antifires glass (e.g., 10mm FPOS: 3mm float + 4mm gel + 3mm float) maintain consistent performance. Local regulations further mandate that frames use G.M.S. hollow steel sections with ceramic wool (density 210 kg/m³) and intumescent seals (20mm × 4mm) to ensure full system integrity. This combination of certified glass and approved framing components allows projects to pass Cyprus building permit inspections without delays.

Fire Rated Glass Classification and Technical Parameters for Cyprus Climatic Conditions

Fire-rated glass classification in Cyprus follows the EN 13501-2 system, where ratings are denoted by E (integrity), I (insulation), and W (radiation control). For Cyprus’s climatic conditions, particularly along the coastal zone of Limassol, thermal insulation performance is critical. Antifires offers glass structures such as the 28mm EI60 panel (6mm + 5.5mm gel + 5mm + 5.5mm gel + 6mm), which achieves 66 minutes integrity and 64 minutes insulation under EN 1364-1 test conditions. This ensures that unexposed side temperature rises remain below the 180°C maximum (140°C average). For hotel lobbies and stairwells requiring vision panels, the 26mm door glass (5mm + 5.5mm gel + 5mm + 5.5mm gel + 5mm) provides 89–90 minutes integrity and 68 minutes insulation. The table below summarizes key certified configurations:

Glass TypeStructureIntegrity (min)Insulation (min)
10mm FPOS3mm float + 4mm gel + 3mm float13516
21mm FPOSMulti-layer composite12030
50mm EI120Multi-layer insulated120120

These systems integrate with ceramic tape (3mm–6mm thickness) and intumescent fire seals to maintain performance under Cyprus’s ambient temperature variations. For projects requiring EI120 fire-rated glass for walls, the 50mm and 54mm ultra-high-performance structures provide full insulation throughout the test duration.

Building Application Scenarios and Engineering Project Demands in Cyprus

Cyprus’s construction market demands fire-rated glazing in diverse scenarios, from luxury seaside villas near Paphos to the Larnaca airport expansion. For escape routes in hotels, the Fire Safety Code requires EI 30 or EI 60 doors and windows to protect stairwells and corridors. Antifires’ 26mm door glass (89–90 min integrity, 68 min insulation) is ideal for these applications, providing vision panels that maintain compartmentation while allowing natural light. In commercial office buildings in Nicosia, EI 60 partitions using 28mm panels (66 min integrity, 64 min insulation) are common for separating fire zones. For luxury residential projects in Paphos, where aesthetic transparency is valued, 21mm FPOS glass (120 min integrity, 30 min insulation) offers a balance between fire safety and design. The Larnaca airport expansion requires large-span glazing systems with EW120 ratings to control radiant heat in terminal corridors. Antifires systems are installed with M6/M8 anchor bolts at 300–600mm spacing and 3mm–5mm expansion gaps filled with ceramic fiber, ensuring structural stability under fire exposure. For renovation projects in old Nicosia buildings, custom-sized fire-rated windows can be fabricated to match existing openings while meeting modern code requirements. These scenarios demonstrate the versatility of Antifires products across Cyprus’s varied building typologies.

Brand Advantages and Reasons for Local Customers Choosing Antifires Products

Antifires distinguishes itself in the Cyprus market through direct supply from EU-certified factories with full EN 16034 CE marking. This certification ensures that all products, from 6mm E90 glass to 50mm EI120 panels, meet the European Construction Product Regulation (CPR) requirements. Local customers benefit from on-site specification review for Cyprus building permits, a service that prevents project delays common with non-compliant imports. The technical team assists contractors in Limassol and Nicosia with selecting appropriate glass structures, frames, and sealants based on the project’s fire resistance requirements. Antifires systems are tested under BS 476 Part 22 and BS EN 1634-1, with documented performance data such as 10mm FPOS achieving 135 minutes integrity and 28mm EI60 panels achieving 64 minutes insulation. For coastal projects, the use of ceramic wool (density 210 kg/m³) and intumescent seals ensures resistance to humidity and thermal cycling. Additionally, Antifires offers fire-rated glass partitions that integrate seamlessly with existing steel framing systems. This combination of certified testing, localized support, and direct supply chain makes Antifires a trusted partner for architects, engineers, and contractors seeking code-compliant passive fire protection in Cyprus.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire-rated glass fully complies with the Cyprus Fire Safety Code (2016) and is tested to BS EN 1364-1:1999/2015 and BS EN 1634-1:2008/2014. These European standards are recognized by the Cyprus Fire Service and local building control authorities. Products are classified under EN 13501-2 with ratings from EI 30 to EI 120, ensuring acceptance for compartment walls, escape routes, and vision panels. Each system is tested with certified frames, intumescent seals, and ceramic wool to replicate real-world installation conditions. Documentation includes furnace test reports with Type K thermocouples and unexposed surface monitoring, providing verifiable proof of compliance for building permit applications in Nicosia, Limassol, and other Cypriot municipalities.

For hotel escape routes in Cyprus, the Fire Safety Code of Cyprus (2016) typically requires a minimum of EI 30 (30 minutes integrity and insulation) for doors and glazed partitions. However, many local authorities and insurance standards recommend EI 60 for stairwell enclosures and high-occupancy corridors to provide additional safety margins. Antifires offers certified 26mm door glass (89–90 min integrity, 68 min insulation) and 28mm EI60 panels (66 min integrity, 64 min insulation) that meet these requirements. For coastal hotels in Limassol, where radiant heat control is critical, EW120 rated systems are also available. Specifiers should consult the project’s fire safety engineer to confirm the exact rating needed based on building height, occupancy, and compartment size.

Yes, Antifires can provide custom-sized fire windows for renovation projects in old Nicosia buildings. The manufacturing process uses the same certified glass structures (e.g., 10mm FPOS or 21mm FPOS) and frames as standard products, but dimensions are tailored to match existing openings. Custom windows are tested to the same BS EN 1364-1 and BS EN 1634-1 standards, with performance ratings such as E 90 or EI 60 depending on the glass configuration. Installation includes ceramic wool (3mm–6mm) and intumescent seals (20mm × 4mm) to maintain fire resistance at the frame-to-wall interface. Contractors should provide exact opening measurements and required fire rating to Antifires for a custom quotation. This service is ideal for heritage buildings where preserving original window proportions is essential for architectural consistency.