Hpa-An, Myanmar Certified Fire Rated Glass for Compliant Building Safety

For building professionals in Hpa-An, Myanmar, ensuring structural fire safety requires a thorough understanding of both international test standards and local regulatory frameworks. The Myanmar National Building Code (MNBC) serves as the primary regulatory document, explicitly referencing BS 476 Part 22: 1987 for the fire resistance testing of non-loadbearing glazing assemblies. This standard governs the performance of fire rated glass used in critical applications such as egress routes, compartment walls, and fire door assemblies. Antifires aligns all product certifications with these requirements, supplying systems that have undergone rigorous furnace testing under conditions specified by BS EN 1634-1 and ASTM E119. For Hpa-An’s growing mixed-use developments—combining commercial retail with residential towers—specifying the correct fire partition solutions is essential to contain fire spread and maintain structural integrity. The local climate, characterized by high humidity and seasonal monsoon rains, further demands that glazing systems resist thermal stress and seal degradation. By integrating certified fire-rated glass with robust steel framing and intumescent seals, projects in Hpa-An can achieve compliance with MNBC life safety objectives. For further reference on the official code provisions, building professionals are encouraged to consult the Myanmar Construction Industry Development Council (MCIDC) resources for updated regulatory guidance.

Myanmar Building Code Requirements for Fire Resistant Glazing in Hpa-An

Compliance with the Myanmar National Building Code (MNBC) in Hpa-An mandates that all glazed elements used for fire compartmentation and means of egress meet specific performance criteria derived from BS 476 Part 22 and BS EN 1364-1. These standards define two critical parameters: Integrity (E), which measures resistance to flame and hot gas penetration, and Insulation (I), which limits temperature rise on the unexposed side to a maximum of 180°C. For Hpa-An’s typical mixed-use buildings, Antifires supplies systems that achieve certified E60 and E90 ratings for integrity-only applications, and EI30 to EI60 ratings where both flame and heat blocking are required. The table below outlines typical performance thresholds relevant to local building types:

Application AreaRequired RatingKey Standard
Stairwell enclosuresE60 / EI30BS 476 Part 22
Corridor partitionsE90 / EI60BS EN 1634-1
Facade glazing (ground floor)E120 (Integrity)ASTM E119

Installation in Hpa-An requires careful attention to expansion gaps (3–5 mm) filled with ceramic fiber and the use of G.M.S. hollow steel frames to accommodate thermal movement. This localized approach ensures that the tested performance of the 60 minute fire rated glass is replicated in the field.

Selecting Fire Rated Glass EI-Class Ratings for Hpa-An Commercial Projects

Selecting the appropriate EI-class fire rated glass for Hpa-An commercial projects—such as hotels, government offices, and retail centers—requires a precise understanding of the building’s occupancy load and fire load density. EI30, EI60, and EI120 ratings denote the duration (in minutes) for which the glazing maintains both integrity and insulation under furnace test conditions. For example, a hotel lobby requiring a 60-minute fire-rated partition must use glass that prevents flame passage and limits radiant heat transfer, protecting egress paths and adjacent spaces. Antifires offers laminated fire-resistant glass and wired glass options, each engineered with specific intumescent interlayers. The 10mm FPOS (3mm float + 4mm gel + 3mm float) provides integrity up to 135 minutes with insulation for 16 minutes, while the 21mm FPOS multi-layer composite structure delivers 120 minutes integrity and 30 minutes insulation. For projects requiring extended heat blocking, the 28mm EI60 panel (6mm + 5.5mm gel + 5mm + 5.5mm gel + 6mm) achieves 66 minutes integrity and 64 minutes insulation. These systems are designed to withstand Hpa-An’s humidity levels (43%–90% RH during tests) without delamination. For high-traffic commercial zones, specifying 90 minute fire rated glass ensures robust performance in corridor and lobby applications.

Fire Rated Door and Window Applications in Hpa-An Industrial and Residential Zones

Hpa-An’s expanding industrial parks and residential complexes present distinct fire safety challenges that demand tailored fire rated door and window systems. In industrial zones, factory perimeters and warehouse openings require fire rated windows that maintain integrity under high thermal stress while allowing natural light. Antifires supplies complete assemblies that integrate with local masonry and steel structures, using ceramic wool (3–6 mm, density 210 kg/m³) and intumescent fire seals (20mm × 4mm) to seal gaps. For residential stairwells and corridor egress, fire rated doors must comply with BS EN 1634-1 for both integrity and self-closing functionality. The 26mm door glass (5mm + 5.5mm gel + 5mm + 5.5mm gel + 5mm) achieves 89–90 minutes integrity and 68 minutes insulation, making it suitable for apartment building escape routes. Industrial applications often require E120 integrity-only ratings for perimeter glazing, using 6mm E90 glass or 8mm glass systems (73 minutes integrity) depending on fire load calculations. All installations must account for local seismic and wind load considerations, with M6/M8 anchor bolts spaced at 300–600 mm intervals to secure frames. For factory and warehouse projects, referring to 120 minute fire rated glass ensures compliance with high-hazard occupancy requirements.

Antifires Localized Support and Certified Product Supply for Hpa-An Buyers

Antifires provides comprehensive support for Hpa-An buyers, including Myanmar-specific documentation such as BS 476 Part 22 and BS EN 1634-1 test reports, product certifications, and material declarations. This documentation is critical for local building permit approvals and insurance compliance. The logistics network ensures timely delivery to Hpa-An via Yangon-based distribution hubs, with all products packaged to withstand monsoon conditions. Technical consultation services cover custom fire rated glazing and door installations, including on-site assessment of existing masonry and steel structures. For projects requiring non-standard dimensions or specific EI30 to EI120 ratings, Antifires engineers provide detailed shop drawings and installation manuals. The company also offers guidance on fire-rated insulation board (12–15 mm) and ceramic tape selection to ensure system compatibility. For Hpa-An architects and contractors, access to certified fire partition solutions streamlines the specification process, reducing project delays and ensuring that all passive fire protection elements meet MNBC requirements. This localized support model, combined with global testing credentials, positions Antifires as a reliable partner for Hpa-An’s growing construction market.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Antifires’ fire rated glass for Hpa-An projects complies primarily with BS 476 Part 22: 1987, the standard referenced by the Myanmar National Building Code (MNBC) for non-loadbearing glazing assemblies. Additionally, all products are tested under BS EN 1634-1: 2008/2014 for door and shutter assemblies and BS EN 1364-1: 1999/2015 for glazed panels. These standards assess Integrity (E) and Insulation (I) performance under controlled furnace conditions. Antifires provides certified test reports from accredited laboratories for each product line, ensuring full traceability and local regulatory acceptance.

Yes, Antifires supplies fire rated glass and doors specifically engineered for high-humidity environments like Hpa-An. The laminated intumescent gel used in products such as the 10mm FPOS and 21mm FPOS is formulated to resist moisture ingress and delamination. All systems have been tested under relative humidity conditions ranging from 43% to 90% without performance degradation. Additionally, the ceramic wool and intumescent seals used in frame assemblies are non-hygroscopic, preventing swelling or seal failure in monsoon conditions. Proper installation with adequate expansion gaps (3–5 mm) further mitigates humidity-related thermal stress.

Antifires offers remote technical consultation and detailed installation manuals for Hpa-An projects. While on-site support is subject to project scope and logistics, the company provides comprehensive documentation including shop drawings, anchor bolt spacing guidelines (300–600 mm), and ceramic tape placement instructions. For complex installations, Antifires can coordinate with local certified installers trained in BS EN 1634-1 assembly procedures. All technical support is backed by BS 476 and BS EN 1364-1 test data, ensuring that field installation replicates laboratory conditions. Buyers are encouraged to submit project details for a customized support plan.