Pasig City Certified Fire Rated Glass for Philippine Building Compliance

Pasig City, a central business hub in Metro Manila, demands rigorous compliance with the Revised Fire Code of the Philippines (RA 9514) and the National Building Code (PD 1096). For high-rise commercial towers in Ortigas Center and residential condominiums along the Pasig River, fire-rated glazing is not optional—it is a mandatory requirement for exit corridors, fire walls, and enclosed stairwells. Antifires provides certified fire rated glass systems that align with these local mandates, referencing international standards such as BS 476 Part 22 and ASTM E119 to ensure structural integrity during a fire event. The local enforcement by the Bureau of Fire Protection (BFP) Pasig requires documented proof of fire resistance ratings, typically ranging from 60 minutes (E60) for corridor enclosures to 120 minutes (EI120) for critical fire-rated separations. Antifires’ product portfolio, including 21mm FPOS and 28mm EI60 panels, meets these thresholds with verified test data. Developers and contractors operating in Pasig City can reference the official RA 9514 Implementing Rules and Regulations for detailed compliance pathways. By integrating fire-resistant glazing that controls both flame penetration and thermal transmission, building owners reduce liability and enhance occupant safety in this densely populated urban environment.

Implementing Fire Safety Compliance Under Pasig City’s Revised Fire Code of the Philippines

Pasig City enforces the Revised Fire Code of the Philippines (RA 9514) alongside local ordinances that mandate fire-rated assemblies in all buildings exceeding 15 meters in height. For developments in the Ortigas Center business district, the National Building Code (PD 1096) specifically requires fire resistance ratings of 60 to 120 minutes for exit corridors, fire walls, and vertical shaft enclosures. Antifires supplies fire rated glass systems that comply with these requirements through certified testing under BS 476 Part 22. The glazed assemblies incorporate intumescent gel layers that expand under heat, maintaining integrity by preventing flame penetration and hot gas passage. For Pasig City’s mixed-use towers, the 10mm FPOS glass (integrity 135 minutes) serves as a reliable solution for corridor partitions, while the 28mm EI60 panel (integrity 66 minutes, insulation 64 minutes) meets the stricter insulation demands for fire-rated doors adjacent to escape routes. Local building officials in Pasig City require submission of third-party test reports during the permitting phase, and Antifires provides documentation that aligns with BFP Pasig’s inspection protocols. This approach ensures that new constructions and major retrofitting projects achieve code compliance without delaying occupancy approvals.

Selecting Fire Rated Glass Grades for Pasig City’s Tropical Climate and High-Humidity Conditions

Pasig City’s tropical climate, characterized by high relative humidity (often exceeding 80%) and frequent typhoons, presents unique challenges for fire-rated glazing systems. Moisture ingress can degrade intumescent interlayers over time, compromising the glass’s ability to expand and seal during a fire. Antifires addresses this through sealed multi-layer constructions, such as the 15mm FPOS and 21mm FPOS glass, which incorporate desiccant-filled edge seals and ceramic wool gaskets to prevent humidity penetration. These systems maintain integrity ratings up to 132 minutes and 120 minutes respectively, even after prolonged exposure to tropical conditions. The frame assemblies use G.M.S. hollow steel sections with ceramic tape (3mm–6mm, density 210 kg/m³) and intumescent fire seals (20mm × 4mm) that accommodate thermal expansion without cracking. For Pasig City’s high-rise facades exposed to typhoon winds, the glazing systems undergo additional structural load calculations to ensure the glass remains secure under positive and negative wind pressures. The 50mm and 54mm ultra-high-performance glass units, certified to EI120 standards, provide both fire resistance and thermal insulation, making them suitable for exterior walls in mixed-use developments. Regular maintenance inspections, as recommended by BFP Pasig, include checking seal integrity and glass surface condition to sustain long-term performance in this demanding environment.

Meeting Pasig City’s Building Application Demands for High-Rise and Mixed-Use Developments

Pasig City’s rapid urbanization, particularly in the Ortigas Center and Kapitolyo areas, drives demand for fire-rated glazing in high-rise commercial towers, residential condominiums, and mixed-use complexes. These projects require fire rated glass systems that meet both fire resistance ratings and aesthetic transparency for open-plan layouts. Antifires provides solutions tailored to these applications, including 26mm door glass (integrity 89–90 minutes, insulation 68 minutes) for fire-rated entrance doors and 28mm EI60 panels for partition walls separating tenant spaces from common corridors. For large-scale developments like office towers exceeding 30 stories, the 50mm EI120 glass units serve as fire barriers between floors, preventing vertical flame spread as mandated by PD 1096. The installation process follows strict guidelines: frames are anchored with M6/M8 bolts at 300–600mm spacing, expansion gaps of 3mm–5mm are filled with ceramic fiber, and fire-rated insulation boards (12mm–15mm) are integrated behind the glass. These specifications ensure that the assemblies perform as tested during furnace trials, where maximum deflection reached 38mm–152mm toward the furnace without breaching integrity. Contractors in Pasig City benefit from Antifires’ pre-engineered systems that reduce on-site installation errors and accelerate project timelines, particularly for fast-track commercial fit-outs in the city’s competitive real estate market.

Why Pasig City Developers and Contractors Choose Antifires for Fire Rated Glass Systems

Pasig City developers and contractors consistently select Antifires for fire-rated glazing due to the company’s proven track record in local compliance and technical reliability. The products carry third-party test reports aligned with UL 10C and BS 476 Part 22 standards, which are accepted by the Bureau of Fire Protection (BFP) Pasig during plan review and final inspection. This eliminates delays associated with documentation verification, a common pain point in Philippine construction projects. Antifires offers a comprehensive product range—from 6mm E90 glass for simple corridor partitions to 54mm EI120 units for critical fire-rated walls—allowing contractors to source all glazing needs from a single supplier. The company’s technical support team provides installation guidance specific to Pasig City’s seismic zone and typhoon-prone conditions, ensuring that the framing systems (using G.M.S. hollow steel sections and ceramic wool) are properly anchored and sealed. For high-profile projects in Ortigas Center, where fire safety inspections are rigorous, Antifires’ pre-certified assemblies reduce the risk of non-compliance and costly rework. The use of intumescent fire seals and ceramic tape in the glazing channels ensures that the systems maintain their rated performance even after years of exposure to Pasig City’s humidity and temperature fluctuations. This combination of certified performance, local code alignment, and installation expertise makes Antifires the preferred partner for fire-rated glass solutions in the city.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Antifires offers fire resistance ratings ranging from E60 (integrity only) to EI120 (integrity and insulation), covering the 60-minute and 120-minute thresholds commonly required by the National Building Code (PD 1096) and Revised Fire Code (RA 9514) for Pasig City projects. For exit corridors and fire walls, products like the 10mm FPOS (integrity 135 minutes) and 28mm EI60 panel (integrity 66 minutes, insulation 64 minutes) provide verified performance. These ratings are certified under BS 476 Part 22 and ASTM E119, ensuring alignment with Philippine building codes. Developers can select from single-layer to multi-layer insulated glass units depending on the specific fire zone requirements in their building plans.

Yes, Antifires provides comprehensive third-party test reports and certification documentation that meet the requirements of the Bureau of Fire Protection (BFP) Pasig for projects in Ortigas Center and throughout the city. The documentation includes furnace test data from accredited laboratories, detailing integrity and insulation performance under standard fire curves. For high-rise commercial towers, the reports cover BS 476 Part 22 and UL 10C standards, which are accepted by local building officials during the permitting and final inspection stages. Antifires also supplies material specifications and installation guidelines that align with BFP Pasig’s checklist, streamlining the approval process for new constructions and retrofitting projects.

Antifires ensures long-term performance in Pasig City’s high humidity and typhoon-prone conditions through sealed multi-layer glass constructions and corrosion-resistant framing. The 15mm FPOS and 21mm FPOS glass units incorporate desiccant-filled edge seals that prevent moisture ingress into the intumescent gel layers, maintaining their fire-expansion properties. Frame assemblies use G.M.S. hollow steel sections with ceramic wool gaskets (3mm–6mm) and intumescent fire seals (20mm × 4mm) that accommodate thermal and wind-induced movements without compromising the fire barrier. These systems have been tested under ambient temperatures of 27°C–36°C and relative humidity up to 90%, replicating tropical conditions. Regular visual inspections of seals and glass surfaces, as recommended by BFP Pasig, further ensure sustained performance over the building’s lifespan.