Tangerang Certified Fire Rated Glass for Indonesian Building Safety Compliance

In Tangerang, Indonesia’s rapidly expanding industrial and commercial hub, building safety compliance is governed by SNI 03-1746-2000, the national standard for fire resistance testing of construction elements. This regulation, aligned with international benchmarks such as ASTM E119 and BS 476 Part 22, mandates that all fire-rated glazing systems in high-rise residential towers, warehouses, and mixed-use developments must demonstrate verified integrity (E) and insulation (I) performance under specific time-temperature curves. Antifires supplies certified fire rated glass solutions that meet these stringent local requirements, ensuring that every door, window, and partition system is factory-tested to resist fire penetration and thermal transmission for durations ranging from 30 to 120 minutes.

The application of these standards is critical in Tangerang’s tropical climate, where high humidity and ambient temperatures between 27°C and 36°C can affect material behavior during a fire event. Antifires’ products, including the 10mm FPOS (integrity 135 min, insulation 16 min) and 28mm EI60 panels (integrity 66 min, insulation 64 min), are engineered with multi-layer tempered glass and intumescent gel interlayers that maintain dimensional stability under extreme heat. For detailed regulatory guidance, contractors can reference the official BSI Group standards documentation for cross-comparison with SNI protocols. By integrating these certified systems, Tangerang developers achieve full compliance with local fire safety laws while enhancing occupant protection in evacuation routes and compartmentation zones.

Tangerang Building Code Mandates SNI 03-1746-2000 for Fire Resistant Glazing

Tangerang’s building code, specifically SNI 03-1746-2000, establishes the legal framework for passive fire protection in all commercial and high-rise residential structures. This standard requires that glazed assemblies—including doors, windows, and partitions—achieve minimum fire resistance ratings based on building height, occupancy type, and fire load. Antifires ensures that every fire-rated glass system supplied to Tangerang projects is tested to this local regulation, with certified performance for both integrity (E) and insulation (I) classifications. For example, the 21mm FPOS glass (integrity 120 min, insulation 30 min) is designed to prevent flame penetration and limit heat transfer, meeting the SNI criteria for fire-resistant glazing in stairwells and corridor enclosures.

Local enforcement in Tangerang’s industrial zones—such as the Kawasan Industri Tangerang (KIT)—demands that fire doors and windows be tested to the same time-temperature curve used in BS EN 1634-1:2008. Antifires’ assemblies incorporate G.M.S. hollow steel frames, ceramic wool (3mm–6mm, density 210 kg/m³), and intumescent fire seals (20mm × 4mm) to ensure a tight seal under fire conditions. The table below summarizes key product ratings relevant to Tangerang’s compliance needs:

ProductIntegrity (min)Insulation (min)Typical Application
10mm FPOS13516Partitions with moderate insulation needs
28mm EI606664Doors and windows in escape routes
50mm EI120120120High-risk industrial compartments

These ratings are verified through furnace tests using Type K thermocouples (9–12 channels) and unexposed surface monitoring (10–55 thermocouples), ensuring accuracy under local ambient conditions. By selecting EI-class glass, Tangerang contractors avoid costly project delays caused by non-compliant assemblies.

Selecting EI-Class Fire Rated Glass for Tangerang’s High-Humidity Tropical Climate

Tangerang’s tropical climate, characterized by relative humidity levels between 43% and 90% and ambient temperatures of 27°C–36°C, presents unique challenges for fire-rated glazing systems. High humidity can degrade intumescent gel layers over time, reducing their ability to expand and form an insulating char during a fire. Antifires addresses this by using multi-layer tempered glass with encapsulated intumescent interlayers—such as the 15mm FPOS (integrity up to 132 min, insulation 33–34 min)—which are sealed against moisture ingress. The 26mm door glass (integrity 89–90 min, insulation 68 min) is specifically engineered for Tangerang’s industrial zones, where fire doors must withstand both thermal stress and environmental exposure.

Local enforcement in Tangerang’s industrial zones, including Kawasan Industri Jatake and Modern Cikande Industrial Estate, requires fire doors and windows to achieve 60 to 120 minute fire resistance levels. Antifires’ certified assemblies are tested to the BS EN 1364-1:1999 standard, which simulates real fire conditions with furnace pressures of 0 ±2 Pa (after 5 minutes). The following list outlines key product features for these applications:

  • Frame System: G.M.S. hollow steel sections with 12mm–15mm fire-rated insulation board.
  • Sealant: Ceramic tape (3mm–6mm) and intumescent seals (20mm × 4mm) for gap control.
  • Installation: M6/M8 anchor bolts at 300–600mm spacing, with 3mm–5mm expansion gaps filled with ceramic fiber.

These specifications ensure that Tangerang’s fire doors and windows maintain their rated performance even after years of exposure to high humidity, preventing project delays during local fire inspections.

Fire Rated Glass Applications in Tangerang’s Warehouses and Mixed-Use Developments

In Tangerang’s warehouses and mixed-use developments—such as those in BSD City and Summarecon Serpong—fire-rated glass plays a critical role in compartmentation and egress protection. These projects often require glazed partitions and doors that separate storage areas from occupied spaces, limiting fire spread for up to 120 minutes. Antifires supplies fire partition solutions that combine integrity and insulation, such as the 50mm EI120 glass (integrity 120 min, insulation 120 min), which is ideal for high-risk zones containing flammable materials or electrical equipment.

For mixed-use developments that include retail, office, and residential units, Antifires’ 21mm FPOS glass (integrity 120 min, insulation 30 min) provides a balance of fire safety and natural light transmission. These systems are installed using ceramic wool (density 210 kg/m³) and intumescent fire seals to maintain a continuous fire barrier. The table below highlights typical applications in Tangerang’s building types:

Building TypeProductRatingKey Benefit
Warehouse50mm EI120EI120Full insulation for high fire loads
Mixed-Use21mm FPOSE120, I30Light transmission with moderate insulation
Office Tower28mm EI60EI60Cost-effective compartmentation

During testing, these assemblies exhibit controlled deflection (maximum 38mm–152mm toward the furnace) and prevent cotton pad ignition or sustained flaming. By integrating these certified systems, Tangerang developers achieve both safety and design flexibility.

Why Tangerang Contractors Trust Antifires for Certified Fire Protection Systems

Tangerang contractors trust Antifires for certified fire protection systems because every product is backed by rigorous testing to BS 476 Part 22, BS EN 1634-1, and ASTM E119 standards. This ensures that all fire door systems and glazed partitions meet the specific time-temperature curves required by SNI 03-1746-2000. For example, the 6mm E90 glass (integrity 90 minutes) and 28mm EI60 panel (integrity 66 min, insulation 64 min) have been tested with furnace thermocouples (9–12 channels) and unexposed surface monitoring (10–55 thermocouples) to verify performance under Tangerang’s ambient conditions (27°C–36°C, 43%–90% RH).

Antifires also provides comprehensive technical documentation, including test certificates, installation manuals, and material datasheets, which are essential for customs clearance and project approval in Tangerang. The company’s systems use G.M.S. hollow steel frames, ceramic wool (3mm–6mm), and intumescent seals (20mm × 4mm) to ensure consistent performance across all installations. Contractors benefit from:

  • Pre-Approved Designs: Factory-tested assemblies that simplify local permitting.
  • Climate-Resistant Materials: Multi-layer glass with sealed intumescent gels for tropical conditions.
  • On-Site Support: Guidance on anchor bolt spacing (300–600mm) and expansion gap filling (3mm–5mm).

This combination of certified performance, local compliance, and technical support makes Antifires the preferred partner for Tangerang’s passive fire protection needs.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

The primary standard governing fire rated glass in Tangerang buildings is SNI 03-1746-2000, which specifies fire resistance testing methods for construction elements, including glazed assemblies. This standard is equivalent to international benchmarks like BS 476 Part 22 and ASTM E119, requiring both integrity (E) and insulation (I) ratings for doors, windows, and partitions. Antifires ensures all products comply with SNI 03-1746-2000 by testing to the same time-temperature curves and using certified materials such as multi-layer tempered glass with intumescent interlayers. Contractors should verify that their chosen systems—like the 28mm EI60 or 50mm EI120—have documented test reports aligned with this local regulation.

Antifires ensures its fire doors and windows pass Tangerang’s local fire inspection by providing products that are factory-tested to BS EN 1634-1:2008 and BS 476 Part 22, which are recognized under SNI 03-1746-2000. Each assembly, such as the 26mm door glass (integrity 89–90 min, insulation 68 min), includes certified documentation showing compliance with local time-temperature curves. Additionally, Antifires uses G.M.S. hollow steel frames, ceramic wool seals, and intumescent fire strips (20mm × 4mm) to maintain a continuous fire barrier. Installation follows strict guidelines—anchor bolts at 300–600mm spacing and 3mm–5mm expansion gaps filled with ceramic fiber—ensuring the system performs as tested during inspection.

Yes, Antifires provides comprehensive technical documentation for customs clearance and project approval in Tangerang. This includes test certificates from accredited laboratories (e.g., BS 476 Part 22, BS EN 1634-1), material datasheets detailing glass composition and frame specifications, and installation manuals with anchor bolt spacing and sealant requirements. For products like the 10mm FPOS (integrity 135 min) or 50mm EI120, documentation verifies compliance with SNI 03-1746-2000 and international standards. These documents facilitate smooth customs processing and demonstrate to local authorities that the fire-rated glass systems meet Tangerang’s building safety regulations.