Trujillo’s Trusted Certified Fire Rated Glass for Compliant Building Projects

Trujillo, a growing commercial and cultural hub in Peru’s La Libertad region, demands construction materials that meet stringent local fire safety codes. For architects, contractors, and building owners, specifying certified fire rated glass is essential to comply with the Reglamento Nacional de Edificaciones (RNE), particularly Norma A.130 which governs fire protection in buildings. This standard mandates specific fire resistance ratings for exit enclosures, compartment walls, and glazed assemblies to ensure safe egress and prevent fire spread. Antifires provides a comprehensive range of fire-resistant glazing solutions validated through rigorous testing to international benchmarks such as ASTM E119 and BS EN 1634-1, offering documented proof of performance for municipal inspections in Trujillo. These systems are engineered to deliver precise integrity (E) and insulation (I) ratings, from 30 to 120 minutes, meeting the diverse requirements of commercial high-rises, healthcare facilities, and heritage restorations. By integrating certified fire-rated glass into their projects, Trujillo’s construction professionals can confidently achieve compliance while maintaining architectural transparency. For further reference on national standards, consult the official Peruvian National Building Regulations (RNE) portal.

Peruvian National Building Regulations and Fire Safety Codes for Trujillo Construction

Compliance with Norma A.130 of the Peruvian RNE is a foundational requirement for any glazed fire-rated installation in Trujillo. This regulation specifies fire resistance durations for structural elements based on building occupancy and height, often requiring 60 to 120 minutes of integrity for stairwell enclosures and fire-rated partitions. Antifires’ glazed systems are tested to international protocols such as BS 476 Part 22 and ASTM E119, providing the certified documentation needed for local permit approvals. The test data confirms that these assemblies maintain structural stability under furnace conditions reaching over 1000°C, with thermocouple monitoring ensuring precise thermal performance. For Trujillo’s municipal reviewers, the availability of third-party laboratory reports eliminates ambiguity, allowing swift project sign-offs. Key compliance features include:

  • Certified integrity (E) ratings from 30 to 120 minutes for exit enclosures.
  • Insulation (I) performance limiting unexposed side temperature rises to ≤140°C average.
  • Framing systems using G.M.S. hollow steel sections with intumescent seals to prevent gap penetration.
  • Installation protocols aligned with local seismic and wind load requirements.

Selecting Fire Rated Glass Integrity and Insulation Ratings for Coastal Climates

Trujillo’s coastal desert climate presents unique challenges for fire-rated glazing, including thermal cycling from intense daytime heat to cool nights, as well as UV exposure that can degrade standard sealants. Antifires addresses these conditions by offering laminated and multi-layer fire rated glass with high mechanical stability. For example, the 28mm EI60 panel (6mm + 5.5mm gel + 5mm + 5.5mm gel + 6mm) provides both integrity and insulation for up to 66 and 64 minutes respectively, while its robust construction resists thermal stress. The selection between E (integrity only) and EI (integrity plus insulation) classifications depends on the application:

RatingTypical ApplicationRecommended Glass
E60Internal vision panels in corridors6mm E90 glass (integrity only)
EI60Stairwell enclosures near exits28mm EI60 panel
EI120Compartment walls in high-rises50mm/54mm ultra-high-performance glass

For projects near the coast, ceramic wool (density 210 kg/m³) and intumescent seals (20mm × 4mm) are specified to maintain performance against humidity, while expansion gaps of 3–5mm accommodate seismic movement.

Fire Rated Applications in Trujillo’s Historic Centers and Modern Commercial Hubs

Trujillo’s architectural landscape ranges from colonial-era buildings in the historic center to modern commercial hubs in La Libertad, each requiring tailored fire-rated solutions. In heritage restorations, Antifires’ fire rated glass systems are designed to preserve aesthetic integrity while providing certified fire separation. For example, a 10mm FPOS glass (3mm float + 4mm gel + 3mm float) offers 135 minutes integrity with minimal visual obstruction, suitable for period façades. In new commercial complexes, such as shopping malls and office towers, EI-rated assemblies like the 21mm FPOS (120 min integrity, 30 min insulation) are deployed in egress routes and atrium partitions. Key application scenarios include:

  • Hotel egress routes: 26mm door glass (89–90 min integrity, 68 min insulation) for fire-rated doors in corridors.
  • Hospital operating theaters: 50mm EI120 glass for clean room separation with radiation control (W).
  • Industrial warehouses near Port of Salaverry: 15mm FPOS (132 min integrity) for high-traffic zones requiring impact resistance.

Each installation uses ceramic tape and anchor bolts at 300–600mm spacing to ensure structural stability under fire conditions, with deflection limits of 38–152mm toward the furnace as per test data.

Antifires Local Technical Support and Certified Product Supply Chain for Peru

Antifires provides comprehensive technical support for Trujillo-based contractors and specifiers, ensuring seamless integration of fire rated glass systems into local projects. Services include fire resistance calculation reports based on certified test data, installation guidance aligned with RNE Norma A.130, and product selection assistance for coastal and seismic conditions. All products carry third-party certifications from laboratories using Type K thermocouples (9–12 channels) and unexposed surface monitoring (10–55 thermocouples), ensuring acceptance by Peruvian fire authorities. Logistics are streamlined through the Port of Salaverry, providing reliable lead times for bulk orders. Key support features:

  • Direct technical consultation for fire-rated door and partition specifications.
  • Documented test reports for EI60 and EI120 assemblies.
  • After-sales service including on-site inspection and maintenance guidance.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire rated glass complies with Peruvian fire safety standards applicable to Trujillo building permits. All products are tested to international benchmarks such as ASTM E119 and BS EN 1634-1, which are recognized by local authorities for demonstrating compliance with Norma A.130 of the RNE. The test data includes integrity (E) and insulation (I) ratings from 30 to 120 minutes, with documented thermocouple and cotton pad test results. For permit submissions, Antifires provides third-party laboratory reports and installation guidelines that align with municipal inspection requirements, ensuring a smooth approval process for commercial and residential projects in Trujillo.

For stairwell enclosures in Trujillo’s commercial high-rises, a fire resistance rating of EI60 (60 minutes integrity and insulation) is typically recommended as per Norma A.130 for buildings over 15 meters in height. Antifires offers the 28mm EI60 panel (66 min integrity, 64 min insulation) as a standard solution, or the 21mm FPOS (120 min integrity, 30 min insulation) for projects requiring extended integrity. For taller structures exceeding 30 meters, an EI120 rating using 50mm or 54mm ultra-high-performance glass is advised to meet stricter compartmentation requirements. These ratings ensure safe egress and limit heat transfer to unexposed areas during a fire event.

Antifires ensures product durability against Trujillo’s coastal humidity and seismic activity through material selection and system design. The glass assemblies use multi-layer laminated structures with intumescent gels that resist moisture ingress, while frames are constructed from G.M.S. hollow steel sections treated for corrosion resistance. For seismic resilience, expansion gaps of 3–5mm are filled with ceramic fiber, and anchor bolts are installed at 300–600mm spacing to accommodate building movement. Test data confirms that these systems maintain integrity under deflection up to 152mm toward the furnace, simulating real-world seismic conditions. Regular maintenance of intumescent seals and ceramic wool (density 210 kg/m³) further extends service life in coastal environments.