Oran Fire Rated Glass Solutions: Certified Compliance for Local Building Safety

In the rapidly developing construction landscape of Oran, Algeria, ensuring building safety through certified passive fire protection systems is a critical priority for architects, contractors, and facility managers. Antifires delivers specialized fire rated glass and glazed system solutions that are rigorously tested to international standards, including BS 476 Part 22 and BS EN 1634-1, ensuring full compliance with local enforcement requirements. Oran’s building projects must adhere to the Algerian National Fire Safety Regulation (Règlement de Sécurité Incendie), which aligns closely with international codes such as NFPA 101 for means of egress and compartmentation. This localized regulatory framework mandates that glazed barriers in commercial, hospitality, and healthcare facilities achieve specific fire-resistance levels—commonly 60-minute (E60) or 120-minute (EI120) integrity and insulation ratings. Antifires’ product portfolio, including the 21mm FPOS multi-layer composite glass and the 28mm EI60 panel, is engineered to meet these stringent criteria, providing verified performance under furnace test conditions with temperature rises strictly controlled to ≤140°C average and ≤180°C maximum on the unexposed side. By integrating certified fire-rated systems, Oran’s development projects can confidently pass municipal inspections while maintaining architectural transparency and design flexibility. For further details on specific product configurations, explore our range of 60-minute fire rated glass systems designed for partition and door applications.

Algerian Fire Safety Codes and Oran’s Enforcement of Standard NFPA 101

The Algerian National Fire Safety Regulation, enforced locally by Oran’s municipal building authorities, establishes rigorous requirements for fire compartmentation in all new construction and major renovations. This regulation draws heavily from NFPA 101, particularly regarding egress pathways, fire-resistance ratings, and the use of approved materials in barrier assemblies. For glazed systems, Oran’s enforcement typically mandates a minimum integrity (E) rating of 60 minutes for corridor and stairwell enclosures, with higher ratings—up to 120 minutes—required for fire-rated walls separating distinct occupancy zones. Antifires addresses these demands with certified products such as the 10mm FPOS glass, which achieves an integrity rating of 135 minutes under BS 476 Part 22, and the 15mm FPOS system, offering up to 132 minutes of integrity. These systems are installed within G.M.S. hollow steel frames, using 12mm to 15mm fire-rated insulation boards and 3mm to 6mm ceramic wool (density 210 kg/m³) to ensure structural stability and gap sealing. During inspections, compliance is verified through documented test reports that confirm performance under furnace pressures of 0 ±2 Pa after five minutes, with thermocouple monitoring across 9 to 12 channels on the exposed side. For projects requiring both integrity and thermal insulation, the 21mm FPOS glass delivers a certified EI30 rating (120 minutes integrity, 30 minutes insulation), making it suitable for high-occupancy buildings in Oran’s commercial zones. Architects and specifiers can consult the 90-minute fire rated glass options for enhanced compartmentation solutions.

Selecting Fire Rated Glass for Oran’s Climate: E and EI Classification Requirements

Oran’s Mediterranean climate, characterized by high humidity (often exceeding 70% relative humidity) and temperature fluctuations between 27°C and 36°C, presents unique challenges for fire-rated glazing systems. Selecting the appropriate classification—Integrity-only (E) or Integrity plus Insulation (EI)—is essential for ensuring long-term performance and regulatory compliance. In Oran’s Industrial Park and new commercial districts, high-occupancy buildings such as shopping centers and office towers require EI-rated glass to prevent radiant heat transfer that could ignite adjacent materials. Antifires’ 28mm EI60 panel, tested to BS EN 1634-1, achieves 66 minutes of integrity and 64 minutes of insulation, with an average temperature rise on the unexposed side not exceeding 140°C. For applications where insulation is not critical—such as interior vision panels in low-hazard areas—E-rated glass like the 6mm E90 system provides 90 minutes of integrity with a thinner profile. The glass composition varies accordingly: EI-rated units incorporate intumescent gel layers (e.g., 5mm + 5.5mm gel + 5mm + 5.5mm gel + 6mm for the 28mm panel) that expand under heat to block thermal transmission, while E-rated glass relies on tempered layers that maintain structural stability even after surface cracking at 2–4 minutes. Installation in Oran’s climate demands careful attention to expansion gaps (3mm to 5mm filled with ceramic fiber) and the use of intumescent fire seals (20mm × 4mm) to accommodate thermal movement without compromising the fire barrier. For projects requiring maximum performance, the 50mm and 54mm ultra-high-performance glass systems offer EI120 ratings, delivering 120 minutes of both integrity and insulation. Explore our 120-minute fire rated glass for demanding applications.

Oran’s Hospitality and Healthcare Sectors: Fire Rated Glazing for High-Traffic Zones

Oran’s rapidly expanding hospitality and healthcare sectors—including new hotels along the Corniche and hospital expansions in the city center—demand fire-rated glazing solutions that balance safety with high-traffic functionality. These environments require systems that maintain compartmentation integrity while withstanding frequent door openings, impact loads, and cleaning protocols. Antifires provides specialized glazed door assemblies tested to BS EN 1634-1, such as the 26mm door glass configuration (5mm + 5.5mm gel + 5mm + 5.5mm gel + 5mm), which achieves 89–90 minutes of integrity and 68 minutes of insulation. This performance is critical in hotel corridors and hospital ward separations, where the unexposed side temperature must remain below 180°C maximum rise to protect occupants during evacuation. The glass is installed in G.M.S. hollow steel frames with M6 or M8 anchor bolts spaced at 300–600mm intervals, ensuring structural rigidity under deflection loads of up to 152mm toward the furnace during fire exposure. For healthcare facilities, where radiation control (W) is also a concern, EW120-rated systems limit radiant heat flux to safe levels, protecting adjacent patient rooms. In Oran’s hospitality projects, where aesthetic transparency is paramount, the 21mm FPOS glass provides a slim profile while delivering 120 minutes of integrity and 30 minutes of insulation, enabling open-plan lobby designs without sacrificing safety. All systems are tested under ambient conditions of 27°C–36°C and 43%–90% relative humidity, replicating Oran’s actual environmental conditions. For comprehensive solutions, review our fire rated glass doors designed for commercial high-traffic zones.

Antifires Advantage for Oran: Direct Compliance Support and Localized Logistics

Antifires delivers a distinct advantage to Oran-based projects by combining direct compliance support with localized logistics. Our technical team provides pre-installation guidance to ensure that fire-rated glass systems meet the specific test criteria of the Algerian Centre National d’Études et de Recherches Intégrées du Bâtiment (CNERIB), which references international standards such as BS 476 Part 22 and BS EN 1364-1. This includes verifying that the frame assembly uses 12mm–15mm fire-rated insulation boards, ceramic tape of 3mm–6mm thickness, and intumescent seals sized at 20mm × 4mm—all critical for passing Oran’s municipal inspections. For logistics, Antifires coordinates shipping to Oran’s port and industrial zones with typical lead times of 4–6 weeks for standard panels, with expedited options available for urgent projects. Our product range includes certified ratings from E60 to EI120, with glass structures like the 10mm FPOS (3mm float + 4mm gel + 3mm float) and the 28mm EI60 panel, all accompanied by full test documentation including furnace thermocouple data (9–12 channels) and unexposed surface monitoring (10–55 thermocouples). This ensures that every installation in Oran—whether in the new business district or historic renovation projects—is backed by verifiable performance data. Additionally, Antifires offers on-site technical support for frame installation, anchoring (M6/M8 bolts at 300–600mm spacing), and expansion gap management (3mm–5mm filled with ceramic fiber), reducing the risk of non-compliance. For a complete overview of available systems, explore our fire rated glass partitions tailored for commercial applications.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires provides fire rated glass products that are tested to international standards such as BS 476 Part 22 and BS EN 1634-1, which are recognized by Algeria’s Centre National d’Études et de Recherches Intégrées du Bâtiment (CNERIB) for compliance verification in Oran projects. For example, the 21mm FPOS glass achieves 120 minutes of integrity and 30 minutes of insulation, while the 28mm EI60 panel delivers 66 minutes of integrity and 64 minutes of insulation—both meeting the performance criteria typically required by CNERIB for commercial and hospitality applications. Each product comes with certified test reports documenting furnace conditions, thermocouple readings, and failure modes, which can be submitted directly to Oran’s building authorities during the inspection process.

The typical lead time for delivering fire rated glass panels to a construction site in Oran’s industrial zone is 4 to 6 weeks from order confirmation, depending on the product specification and quantity. Standard panels such as the 10mm FPOS (135-minute integrity) or 15mm FPOS (132-minute integrity) are typically available within this timeframe. For larger or custom orders, such as the 50mm or 54mm EI120 ultra-high-performance glass, lead times may extend to 8 weeks. Antifires coordinates shipping through Oran’s port and offers expedited logistics for urgent projects, with tracking provided to ensure timely arrival at the job site.

Yes, Antifires can customize fire rated glass dimensions for Oran’s historic building renovations while maintaining a 60-minute fire rating (E60 or EI60). Custom sizing is achieved by adjusting the glass composition—for example, using a 26mm door glass configuration (5mm + 5.5mm gel + 5mm + 5.5mm gel + 5mm) that provides 89–90 minutes of integrity and 68 minutes of insulation, or a 28mm EI60 panel with 66 minutes of integrity. The frame, sealant, and anchoring system (M6/M8 bolts at 300–600mm spacing) are adapted to fit existing openings while preserving the building’s architectural character. All custom assemblies are tested to the relevant standards, ensuring compliance with Oran’s municipal requirements for heritage structures.