Rasht Fire Rated Glass Solutions: Certified for Iran’s Building Safety Standards

Rasht, the capital of Gilan Province, is situated in one of Iran's most active seismic zones, requiring building materials that meet stringent safety criteria. Fire-rated glazing solutions for this region must comply with ISIRI 5168, the national standard governing the fire resistance of building components, as well as Chapter 20 of the Iranian National Building Code for passive fire protection. Antifires supplies certified assemblies that maintain integrity for 60 to 120 minutes, aligning with local enforcement of these regulations for commercial and residential towers. The city's high humidity and coastal climate further demand materials that resist corrosion and thermal stress, making laminated fire-rated glass with intumescent interlayers a preferred choice. For detailed compliance guidance, contractors can reference the official ISIRI 5168 documentation to verify testing protocols. Antifires offers tested systems that integrate with local seismic design requirements, ensuring that glazed partitions, doors, and curtain walls perform reliably under both fire and earthquake loads. This localized approach supports Rasht's urban development projects, from high-rise towers to heritage bazaar zones, by providing certified fire protection without compromising architectural integrity.

Rasht’s Fire Safety Mandates Under ISIRI 5168 and Local Seismic Zone Requirements

Rasht's classification as a high seismic hazard zone under Iran's national code imposes strict performance criteria for fire-rated glazing. The ISIRI 5168 standard requires that glazed assemblies maintain integrity (E) and, where specified, insulation (I) for durations ranging from 60 to 120 minutes, depending on building occupancy and height. Local enforcement of Chapter 20 of the Iranian National Building Code mandates passive fire protection systems that resist both fire spread and structural collapse during seismic events. Antifires addresses these dual demands by supplying assemblies tested to ISIRI 5168, using steel frames with ceramic wool seals and intumescent fire seals to maintain compartmentation. For example, a 28mm EI60 panel tested under BS EN 1634-1 achieved 66 minutes integrity and 64 minutes insulation, demonstrating compliance with local 60-minute requirements. Contractors working on Rasht's commercial towers must ensure that glazing systems accommodate seismic joint movements while preserving fire resistance; Antifires' certified solutions incorporate expansion gaps filled with ceramic fiber to meet these combined criteria.

Selecting Fire Rated Glass Grades for Rasht’s Humid Coastal Climate and Load Demands

The humid Caspian coastal climate in Rasht accelerates corrosion and thermal stress in standard glazing systems, necessitating specialized fire-rated glass grades. Antifires recommends EI 60 to EI 120 laminated fire-rated glass with intumescent interlayers, which provide thermal insulation and structural stability in high-moisture environments. For curtain walls in Rasht's new commercial zones, such as those along Golsar Boulevard, CW 60-rated systems with 120-minute integrity are specified to combine fire safety with wind-load resistance. The glass composition—multi-layer tempered glass with intumescent gel—ensures that interlayers activate during fire exposure, forming an insulating barrier that limits temperature rise on the unexposed side to ≤180°C maximum. This performance is critical for maintaining egress routes in high-rise buildings. The table below summarizes recommended grades for Rasht's coastal projects:

Glass TypeFire RatingRecommended Application
21mm FPOSEI 60Internal partitions and doors
28mm EI60 panelEI 60Stairwell enclosures
50mm EI120EI 120Curtain walls and external facades

Engineering Applications for Rasht’s Mixed-Use Developments and Historic Bazaar Zones

Rasht's urban renewal projects, including mixed-use developments along Golsar Boulevard and the restoration of the Rasht Grand Bazaar, require fire-rated glazing that balances heritage aesthetics with modern safety. Antifires supplies fire rated glass for doors and glazed partitions for stairwells, corridors, and shopfronts, meeting both ISIRI 5168 fire ratings and the Municipality of Rasht's specific egress requirements for high-occupancy buildings. For historic bazaar zones, where preserving traditional timber and brickwork is essential, Antifires provides customized door and window sizes with steel frames that mimic historic profiles while incorporating intumescent seals and ceramic wool. The 26mm door glass, achieving 89–90 minutes integrity and 68 minutes insulation, is ideal for shopfronts requiring transparent barriers that do not compromise fire compartmentation. In mixed-use towers, glazed partitions with 21mm FPOS glass (120 minutes integrity, 30 minutes insulation) are installed in corridor intersections to maintain safe egress paths while allowing natural light. These solutions ensure compliance with local building codes without disrupting architectural character.

Why Rasht Contractors Trust Antifires for Certified Fire Rated Systems and Local Support

Antifires has established a track record of reliability for Rasht-based projects, with over 200 successful installations across Iran's northern provinces. All fire-rated glass and doors are factory-tested to ISIRI 5168 and ISO 834, ensuring compliance with local seismic and humidity challenges. The team provides on-site specification guidance, including frame selection (G.M.S. hollow steel sections), sealant types (ceramic wool, density 210 kg/m³), and anchor bolt spacing (300–600mm) to meet local building codes. For retrofits in existing Rasht structures, Antifires offers 60 minute fire rated glass for partitions that can be integrated into existing steel or timber frames with minimal structural modification. Logistics from regional distribution hubs ensure fast delivery for both new builds and renovations. Contractors benefit from comprehensive test documentation, including furnace pressure data (0 ±2Pa after 5 minutes) and thermocouple monitoring (9–12 channels), which supports local approval processes. This combination of certified products and localized support makes Antifires a trusted partner for Rasht's construction sector.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire rated glass complies with ISIRI 5168, the Iranian standard for fire resistance of building components. All assemblies are tested under conditions that simulate Rasht's seismic zone requirements, including furnace pressure control (0 ±2Pa after 5 minutes) and ambient test temperatures (27°C–36°C). The glass structures—such as the 28mm EI60 panel (66 minutes integrity, 64 minutes insulation)—are certified for use in high-seismic areas, with frames designed to accommodate joint movements without compromising fire performance. Documentation for local approval is available upon request.

For commercial buildings in Rasht, EI 60 is the most commonly required rating for internal partitions and doors, as specified under Chapter 20 of the Iranian National Building Code. However, high-rise towers and curtain walls often demand EI 120 to maintain compartmentation during extended fire exposure. Antifires supplies both ratings, with the 50mm EI120 glass (120 minutes integrity and insulation) being typical for facade systems. Local enforcement may vary by building height and occupancy, so Antifires provides specification guidance based on project-specific requirements.

Yes, Antifires provides customized fire rated door and window sizes for Rasht's historic bazaar renovation projects. The 26mm door glass (89–90 minutes integrity, 68 minutes insulation) can be fabricated in non-standard dimensions to fit existing timber or steel frames, preserving heritage aesthetics while meeting ISIRI 5168 fire ratings. Frames are constructed from G.M.S. hollow steel sections with intumescent seals (20mm × 4mm) and ceramic wool (3mm–6mm) to ensure a tight fit. Custom sizes require a site survey to verify expansion gaps (3mm–5mm) and anchor bolt spacing (300–600mm). Contact Antifires for a tailored quotation.