Esenyurt Fire Rated Glass Certified for Turkish Seismic and Fire Safety Standards

Esenyurt, as a rapidly developing district within Istanbul's high seismic zone, demands fire safety solutions that meet rigorous structural and regulatory standards. Certified fire rated glass systems are essential for ensuring compliance with both the Turkish Earthquake Building Code (TBDY 2024) and the national fire protection regulation (Binaların Yangından Korunması Hakkında Yönetmelik). These localized codes mandate that passive fire protection elements, such as glazed partitions and doors, must maintain their integrity and insulation performance even after seismic movement. Antifires supplies fully tested systems that align with TS EN 1363-1 (fire resistance) and TS EN 1364-1 (load-bearing capacity), ensuring that glazed assemblies remain intact during an earthquake and continue to provide effective compartmentation and egress protection. For project stakeholders in Esenyurt, selecting certified fire door systems that are validated for both fire and seismic loads is a critical step toward local regulatory approval. The official Turkish standards, accessible through the Ministry of Environment and Urbanization's documentation, provide the framework for these requirements. Antifires’ product portfolio, including integrity-only and insulation-rated glass, is engineered to meet these localized demands, offering a reliable path to compliance for commercial towers, residential complexes, and logistics facilities.

Esenyurt Building Fire Compliance Under Turkish Seismic Zone Regulations

Esenyurt’s location in a high seismic zone (Istanbul region) imposes unique demands on passive fire protection systems. The TBDY 2024 code requires that fire rated glazing must not only resist fire penetration but also withstand lateral displacements and dynamic loads without catastrophic failure. This means that glass assemblies must be tested for both fire resistance (TS EN 1363-1) and load-bearing capacity (TS EN 1364-1) to ensure structural integrity during and after an earthquake. Local building codes explicitly mandate that passive fire protection elements remain intact following seismic movement, making certified fire-rated glazing critical for safe egress and compartmentation. Antifires addresses this challenge by utilizing robust frame systems—such as G.M.S. hollow steel sections—combined with ceramic wool and intumescent seals that accommodate structural movement without compromising fire performance. For Esenyurt projects, selecting glazing that has been tested under simulated seismic conditions is not optional; it is a regulatory necessity. The integration of these systems into fire partition solutions ensures that buildings maintain their fire safety strategy even after a seismic event, providing both life safety and property protection.

Fire Rated Glass Grade Selection for Esenyurt’s High-Humidity Coastal Environment

The 2024 Turkish Earthquake Building Code (TBDY) and the Ministry of Environment and Urbanization’s fire regulation (Binaların Yangından Korunması Hakkında Yönetmelik) set clear minimum requirements for fire doors and windows in Esenyurt’s commercial towers and residential complexes. Specifically, these regulations require a minimum of 60 minutes fire resistance (E 60) with impact safety (EW 60) to prevent glass fallout during aftershocks. This dual requirement—integrity plus impact resistance—is particularly relevant in Esenyurt’s high-humidity coastal environment, where thermal stress and moisture can degrade standard glass performance. Antifires offers systems that achieve E 60 and EW 60 ratings, using multi-layer tempered glass with intumescent gel that maintains stability under both fire and seismic loads. For example, the 26mm glazed door glass (5mm + 5.5mm gel + 5mm + 5.5mm gel + 5mm) has demonstrated integrity up to 90 minutes and insulation up to 68 minutes in certified tests, making it suitable for high-traffic egress routes. Project specifiers should verify that all glazing components—including frames, seals, and anchors—are rated for the combined fire and seismic demands. Antifires’ certified 60-minute fire rated glass provides a proven solution for Esenyurt’s regulatory landscape.

Fireproof Glass Applications in Esenyurt’s Mixed-Use and Logistics Projects

Esenyurt’s growing portfolio of mixed-use developments and logistics hubs requires fire rated glass systems that balance safety with functional design. In mixed-use projects—combining retail, office, and residential spaces—glazed partitions and doors must provide clear visibility while maintaining compartmentation for up to 120 minutes. For logistics facilities, large-format glazing is often needed for loading docks and warehouse partitions, where impact resistance and quick installation are priorities. Antifires addresses these scenarios with a range of certified systems, including EI60 and EI120 rated panels that use multi-layer insulated fire-resistant glass structures (e.g., 50mm or 54mm assemblies). These systems are tested under conditions that simulate real-world fire scenarios, with furnace temperatures reaching over 1000°C and pressures maintained at 0 ±2Pa. The use of ceramic tape (3mm–6mm, density 210 kg/m³) and intumescent fire seals (20mm × 4mm) ensures that expansion gaps are properly sealed, preventing smoke and flame spread. For Esenyurt’s logistics projects, where downtime due to fire damage can be costly, these certified systems provide reliable protection. Antifires’ 120-minute fire rated glass offers an optimal balance of performance and practicality for such applications.

Antifires Brand Advantages for Esenyurt’s Certified Fire Safety Projects

Antifires brings a distinct advantage to Esenyurt’s certified fire safety projects through a combination of rigorous testing, localized logistics, and technical expertise. All products are tested in accordance with global standards, including BS 476 Part 22, BS EN 1634-1, and ASTM E119, with specific certifications for TS EN 1364-1 and TS EN 1363-1 to meet Turkish requirements. This ensures that every system—from 10mm FPOS glass (integrity 135 min, insulation 16 min) to 54mm EI120 panels (integrity 120 min, insulation up to 120 min)—is backed by verifiable test data. For Esenyurt projects, Antifires offers express delivery within 5 business days from the Avcılar warehouse, with custom-cut panels and doors ready for immediate installation. The company’s technical team provides on-site support for frame selection, sealant application, and anchor spacing (M6/M8 bolts at 300–600mm intervals), ensuring that installation meets the precise requirements of TBDY 2024. By choosing Antifires, project managers and specifiers gain access to a reliable partner with a proven track record in high-seismic zones, delivering fire safety solutions that are both compliant and cost-effective.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire rated glass systems are fully tested to TS EN 1364-1 and TS EN 1363-1, which are the Turkish standards for fire resistance and load-bearing capacity. These tests ensure that the glazing maintains its integrity and insulation performance under both fire exposure and simulated seismic loads, meeting the requirements of the TBDY 2024 code. The systems use robust steel frames, ceramic wool seals, and intumescent materials that accommodate structural movement without compromising fire safety. For Esenyurt projects, this means the glass remains intact during an earthquake and continues to provide effective compartmentation and egress protection. All test reports and certifications are available for verification by local authorities.

For commercial buildings in Esenyurt, Turkish regulations generally require fire doors with vision panels to achieve a minimum of E 60 (60 minutes integrity) with EW 60 (impact safety) to prevent glass fallout during aftershocks. This dual requirement is specified under the Binaların Yangından Korunması Hakkında Yönetmelik and the TBDY 2024 code. Antifires offers systems that meet or exceed these ratings, such as the 26mm door glass (integrity 89–90 min, insulation 68 min) and the 28mm EI60 panel (integrity 66 min, insulation 64 min). These products are tested to BS EN 1634-1 and TS EN 1364-1, ensuring compliance with local standards for both fire resistance and seismic performance.

Antifires offers express delivery within 5 business days for custom-cut fire rated glass panels and fire doors to Esenyurt from the Avcılar warehouse, with freight included for standard orders. The company stocks a range of certified glass types, including 10mm FPOS, 15mm FPOS, and 26mm door glass, which can be cut to specification and shipped quickly. For urgent projects, expedited production is available upon request. All deliveries include installation guides and technical support to ensure proper fitting in accordance with TBDY 2024 and local fire codes. Contact the Antifires sales team for a precise delivery timeline based on project requirements.