Esfahan Certified Fire Rated Glass Solutions for Industrial and Commercial Safety

For industrial and commercial projects in Esfahan, selecting certified fire rated glass and fire door systems is a critical requirement for life safety and regulatory compliance. Antifires provides a comprehensive range of glazing solutions that meet the rigorous demands of Iran’s National Building Code, specifically Chapter 20, which governs fire resistance in egress routes, fire compartments, and structural elements. These products are tested under internationally recognized standards, including BS EN 1634-1 and BS 476 Part 22, ensuring third-party verified performance for local authority approvals. The city’s diverse building stock—from historical districts to new industrial zones—requires assemblies that can withstand fire exposure for 60 to 120 minutes, depending on occupancy type and building height. Antifires’ portfolio includes integrity-only (E) and combined integrity and insulation (EI) ratings, such as EI60 and EI120, which are essential for maintaining compartmentation and preventing fire spread. All systems are supplied with complete certification documentation, making them suitable for submission to Esfahan’s municipal fire department and construction permit authorities. For further reference on Iran’s fire safety regulations, consult the official Iran National Building Code portal. By integrating these certified products, engineers and architects can ensure both safety and compliance in their projects.

Compliance with Iran’s Chapter 20 Fire Safety Code and Esfahan Municipal Bylaws

Compliance with Iran’s National Building Code Chapter 20 and Esfahan’s municipal bylaws is non-negotiable for all commercial and industrial construction. This code mandates specific fire resistance ratings for glazing used in escape routes, fire compartments, and facade elements. Antifires’ fire rated glass systems are tested to BS EN 1634-1:2008 and BS 476 Part 22:1987, providing documented proof of performance for local inspectors. For example, glazing in a fire compartment wall must achieve at least 60 minutes of integrity, while egress corridors often require 90 minutes to ensure safe evacuation. The products are designed with steel frames, intumescent seals, and ceramic wool to meet these strict criteria. Key compliance features include:

  • Certified test data for integrity (E) and insulation (I) ratings, with maximum unexposed side temperature rise limited to 140°C average.
  • Documented installation protocols that align with local fire department inspection checklists, including fixing spacing and expansion gap requirements.
  • Third-party laboratory reports from accredited facilities, ensuring acceptance by Esfahan’s construction permit authorities.

This approach allows project teams to streamline approval processes while maintaining high safety standards.

Selecting Fire Rated Glass Grades for Esfahan’s Climate and Industrial Exposure

Selecting the appropriate fire rated glass grade for Esfahan requires careful consideration of both fire exposure duration and environmental factors. The city’s climate, with hot summers and dry conditions, demands materials that resist thermal stress without compromising fire performance. Antifires offers a range of glass structures tailored to these needs, from 10mm FPOS (integrity up to 135 minutes) to 28mm EI60 panels (integrity 66 min, insulation 64 min). For industrial zones, such as petrochemical facilities, 50mm or 54mm ultra-high-performance glass provides up to 120 minutes of combined integrity and insulation. Key selection criteria include:

  • Integrity-only (E) ratings for internal partitions where radiant heat control is less critical.
  • Insulation (I) ratings for walls adjacent to escape routes or high-value assets, limiting temperature rise to below 180°C at any point.
  • Radiation control (W) ratings for glazing near storage areas with flammable materials.

All products are supplied with detailed technical data sheets, enabling engineers to match the correct rating to the building’s fire load and occupancy classification.

Application of Fire Rated Systems in Esfahan’s Manufacturing and Commercial Buildings

In Esfahan’s manufacturing and commercial buildings, fire rated glazing systems are deployed in critical applications to maintain compartmentation and protect life. For factory floors and warehouses, fire rated glass partitions with EI60 or EI120 ratings are installed to separate production areas from storage zones, preventing fire spread. These systems use multi-layer glass structures with intumescent gel, as seen in 21mm FPOS (integrity 120 min, insulation 30 min), which are ideal for high-traffic areas. In commercial office towers, fire rated doors with glazed vision panels (e.g., 26mm door glass with integrity 89–90 min and insulation 68 min) provide both safety and visibility. Typical project scenarios include:

  • Petrochemical facilities requiring 120-minute integrity for partition walls and observation windows.
  • Hospital corridors where EI60 glazing ensures smoke and heat containment during evacuation.
  • Retail centers using fire rated glass with 60-minute integrity and insulation for storefronts and atrium enclosures.

Each installation is backed by certified test data and installation guidelines, ensuring long-term reliability under fire conditions.

Why Esfahan Engineers Trust Antifires for Certified Fire Rated Products

Esfahan engineers and specifiers trust Antifires for certified fire rated products due to the company’s commitment to rigorous testing and local compliance. Every product is tested under controlled furnace conditions, with parameters such as ambient temperature (27°C–36°C) and furnace pressure (0 ±2 Pa) documented in official reports. The systems incorporate high-quality materials, including G.M.S. hollow steel frames, ceramic wool (density 210 kg/m³), and intumescent fire seals (20mm × 4mm), ensuring consistent performance. Key advantages include:

  • Full certification packages for 90-minute integrity-only glass and 120-minute integrity and insulation systems, accepted by local authorities.
  • Technical support from engineers who understand Iran’s Chapter 20 requirements and can provide installation guidance for complex projects.
  • Proven track record in industrial and commercial applications, with test behavior data (e.g., surface glass cracks at 2–4 minutes, insulation failure between 16–86 minutes) used to optimize system design.

This combination of verified performance and local expertise makes Antifires a reliable partner for Esfahan’s fire safety needs.

REQUEST A QUOTE

Need Fire-Rated Glass Solutions?
Get a Factory Direct Quote & Certifications in 12 Hours.

click

Frequently Asked Questions (FAQ)

Yes, Antifires provides complete EN 1634-1 certification documents for all fire rated glass used in Esfahan industrial projects. These documents include detailed test reports from accredited laboratories, specifying the glass composition (e.g., 10mm FPOS or 28mm EI60 panels), frame materials, and installation methods. The certification confirms the product’s integrity and insulation performance, such as 60 minutes or 120 minutes of fire resistance. This documentation is essential for submission to Esfahan’s municipal fire department and for compliance with Iran’s National Building Code Chapter 20. All reports are provided in both English and Persian upon request.

Under Chapter 20 of Iran’s National Building Code, the required fire resistance rating for glazing in Esfahan’s commercial buildings depends on the building’s height, occupancy, and fire compartment size. For typical egress routes and fire walls, a minimum of 60 minutes of integrity (E60) is mandated. In high-rise buildings or areas with high fire loads, 90 minutes (E90) or 120 minutes (EI120) may be required, especially for partitions separating escape stairs or storage zones. Antifires supplies glass systems that meet these ratings, with certified test data to support local inspection approvals. Engineers should consult the specific building code tables for precise requirements.

Yes, Antifires can supply fire rated glass with 120-minute integrity (E120) for Esfahan’s petrochemical facility partitions and doors. This is achieved using 50mm or 54mm ultra-high-performance glass, which combines multi-layer tempered glass with intumescent gel for extended fire resistance. These systems are tested to BS EN 1634-1 and provide both integrity and insulation (EI120) where required. The glass is installed in steel frames with ceramic wool and intumescent seals to prevent fire and smoke penetration. Complete certification documentation is provided, ensuring compliance with local safety regulations for hazardous industrial environments.