Fire Rated Glass and Certified Fire Protection Systems for Medan Buildings

In Medan, the integration of passive fire protection systems into building design is a critical requirement for safeguarding life and property, particularly within the city's expanding high-density commercial and hospitality sectors. Antifires supplies fire rated glass, certified fire doors, and partition systems that are rigorously tested to meet both international benchmarks and local Indonesian regulatory expectations. The primary standard governing fire resistance testing for non-loadbearing glazing assemblies used in these products is BS 476 Part 22: 1987, which defines performance criteria for integrity (E) and insulation (I). For projects in Medan, compliance with the national standard SNI 03-1735-2000 for building fire protection is mandatory, and Antifires' certified systems provide a direct pathway to meeting these local approval requirements. Whether for a high-rise hotel on Jalan Balai Kota or a hospital complex in the city center, the tested performance of these glazed systems ensures that fire compartmentation is maintained. The technical specifications, including the use of intumescent gel interlayers and G.M.S. hollow steel frames, are designed to withstand the extreme thermal conditions of a fire, with certified ratings ranging from E60 to EI120. For detailed regulatory guidance, building professionals can refer to the official Indonesian National Standard documentation available through BSN (Badan Standardisasi Nasional). Antifires supports Medan architects and contractors by providing products that deliver verified fire resistance, local technical consultation, and streamlined permitting support.

Medan Building Fire Safety Compliance with Indonesia’s SNI 03-1735 and BS 476 Standards

Navigating fire safety compliance in Medan requires a clear understanding of how international test standards align with local regulations. The primary local code, SNI 03-1735-2000, outlines procedures for the installation of passive fire protection systems in buildings, including the use of fire-resistant glazing in escape routes and compartment walls. Antifires addresses this by offering products tested to BS 476 Part 22, a standard widely accepted by Indonesian fire safety authorities for demonstrating equivalence. For example, a 60-minute fire rated glass system certified for integrity (E60) is suitable for protecting corridors and stairwell enclosures in Medan's commercial towers, such as those found in the CBD around Jalan Putri Hijau. The test data confirms that these assemblies, which utilize ceramic wool and intumescent seals within steel frames, prevent the passage of flames and hot gases for the rated duration. This technical alignment simplifies the approval process for local building permits, as the certified performance data provides a verifiable basis for compliance. By selecting systems with documented BS 476 test results, project teams can ensure their passive fire strategy meets the rigorous demands of both the local fire department and international insurance standards.

Fire Rated Glass Grade Selection for Medan’s Tropical Climate and High-Humidity Conditions

The tropical climate of Medan, characterized by consistently high humidity and temperatures averaging 27°C to 32°C, imposes specific demands on fire-rated glazing systems. The performance of intumescent interlayers, which are central to the insulation (I) rating of products like the 28mm EI60 panel, must remain stable under these environmental conditions. Antifires' glass compositions, such as the 21mm FPOS multi-layer composite structure, are engineered to resist moisture ingress and thermal cycling without degrading their fire-resistant properties. For mixed-use developments in areas like Medan Baru, where retail and residential spaces are combined, strict fire compartmentation is enforced by the North Sumatra provincial government. The use of EI60 rated assemblies, which provide both integrity and thermal insulation for up to 60 minutes, is a common requirement for separating different occupancy types. These systems, tested under ambient conditions of 27°C to 36°C and high relative humidity, demonstrate reliable performance. The certified data shows that the average temperature rise on the unexposed side remains below 140°C, ensuring that adjacent areas remain safe for evacuation. This makes them a reliable choice for maintaining compartment integrity in Medan's demanding climate.

Medan Building Application Scenarios: Hotels, Hospitals, and Industrial Warehouses

In Medan's diverse building landscape, the application of fire-rated glass varies significantly by project type. For hotels, such as those along Jalan Sisingamangaraja, the primary requirement is to protect guest room corridors and lobbies. Here, fire rated glass for doors with an integrity rating of E60 is often specified to ensure that smoke and flames cannot spread between floors. In hospitals, like the facilities near Jalan Dr. Mansyur, the focus shifts to insulation (I) ratings to protect patients in intensive care units and operating theaters. The 26mm glazed door glass, certified for 89 minutes of integrity and 68 minutes of insulation, is an optimal solution for these high-sensitivity zones. For industrial warehouses in areas such as Medan Belawan, where large open spaces require robust compartmentation, the 50mm EI120 ultra-high-performance glass provides a two-hour barrier against fire propagation. This product, tested to BS 476 Part 22, maintains its structural integrity even under extreme deflection, which can reach up to 152mm toward the furnace. Each scenario demands a specific balance of integrity, insulation, and radiation control, and Antifires provides certified solutions tailored to these distinct operational needs.

Antifires Brand Advantages: Local Stock, Technical Support, and BS 476 Certification for Medan Clients

Antifires distinguishes itself in the Medan market through a combination of local logistical readiness and technical authority. A key advantage is the availability of local stock for standard products, which significantly reduces lead times compared to international imports. For a typical commercial project, delivery to Medan can be arranged within days, not weeks. This is supported by a dedicated technical support team that assists with specification, installation guidance, and documentation. All products are backed by BS 476 Part 22 test certificates, which are essential for demonstrating compliance during local building inspections. The technical team can provide detailed reports on test conditions, including furnace pressure control and thermocouple data, ensuring full transparency. For complex projects, such as the renovation of a high-rise hotel requiring 120-minute fire rated glass with both integrity and insulation (EI120), Antifires offers pre-engineering support to ensure the assembly, including the steel frame and ceramic fiber expansion gaps, meets the exact project specifications. This end-to-end service, from product selection to installation oversight, provides Medan clients with a reliable and compliant fire protection solution.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire rated glass is designed to meet the performance requirements of Indonesia's SNI standards, specifically SNI 03-1735-2000, for use in Medan commercial buildings. The products are tested to the international BS 476 Part 22 standard, which is widely recognized by Indonesian fire safety authorities as an equivalent benchmark. This ensures that the fire resistance ratings, such as E60 or EI60, are verifiable and accepted during the local building permit process. For projects in Medan, the certified test data provides a clear basis for demonstrating compliance with local fire compartmentation regulations. Antifires can supply the relevant test certificates and technical documentation to support the approval process with local authorities.

For standard fire rated glass products held in local stock, the typical lead time for delivery to Medan is between 3 to 7 business days. This applies to common specifications such as 6mm E90 integrity-only glass or 28mm EI60 insulated panels. The availability of local inventory is a significant advantage for Medan projects, as it eliminates extended shipping times from overseas factories. For custom or large-volume orders, such as the 50mm EI120 ultra-high-performance glass, a lead time of 2 to 4 weeks may be required to allow for fabrication and quality testing. Antifires provides a precise delivery schedule upon order confirmation, ensuring alignment with project timelines.

Absolutely. Antifires can provide full BS 476 Part 22 test certificates for all fire rated glass and door assemblies. For a Medan hotel renovation project, the technical support team will supply the relevant certification documents, including detailed test reports that specify the integrity and insulation performance ratings. Additionally, the team offers installation guidance, including recommendations for frame fixing, expansion gaps (3mm to 5mm), and the use of ceramic wool or intumescent seals. This support ensures that the installed system performs as tested and meets the requirements of local fire safety inspectors. On-site consultation can also be arranged for complex project requirements.