Taguig City Fire Rated Glass: Certified Compliance for BGC High-Rise Developments

As the commercial heart of Metro Manila, Taguig City—particularly Bonifacio Global City (BGC)—demands the highest standards of vertical fire safety. Antifires supplies fire rated glass solutions that strictly comply with the Philippine Fire Code (RA 9514) and NFPA 80, ensuring that high-rise developments, BPO campuses, and mixed-use condominiums meet local fire compartmentation requirements. For BGC skyscrapers, where occupancy density and egress paths are critical, specifying assemblies with verified fire-resistance ratings (FRR) is non-negotiable. Antifires’ product line, tested to BS EN 1634-1 and BS 476 Part 22, provides certified integrity (E) and insulation (I) performance, directly aligning with the Bureau of Fire Protection (BFP) enforcement protocols. The company’s localized approach includes pre-approved fire test reports that simplify the permitting process for Taguig contractors. By integrating intumescent gel technology within laminated glass structures, these systems not only block flame and smoke for up to 120 minutes but also control radiant heat transmission—a crucial factor for protecting egress corridors in BGC’s mixed-use towers. For detailed project specifications and compliance documentation, refer to the official Bureau of Fire Protection (BFP) guidelines and explore Antifires’ 120-minute fire rated glass solutions for high-rise applications.

Aligning with Philippine Fire Code RA 9514 and NFPA 80 for Taguig Commercial Zones

Taguig’s commercial zones, particularly BGC, enforce strict fire compartmentation under RA 9514 (Philippine Fire Code) and NFPA 80 for glazed assemblies. Antifires’ fire rated glass systems are engineered to meet these localized regulations, providing certified fire-resistance ratings (FRR) for occupancy separation and egress protection. The assemblies utilize G.M.S. hollow steel frames with intumescent fire seals (20mm × 4mm) and ceramic wool (density 210 kg/m³), ensuring that the glass-to-frame interface maintains integrity under furnace test conditions. For Taguig’s mixed-use towers, where open-plan layouts require transparent barriers, the 26mm door glass (achieving 89–90 minutes integrity and 68 minutes insulation in BS 476 Part 22 tests) offers a reliable solution for stairwell enclosures. Contractors benefit from pre-compiled documentation that maps test results directly to RA 9514’s FRR tables, streamlining BFP inspections. This technical alignment ensures that every installation—from lobby partitions to corridor glazing—meets the city’s stringent life safety requirements without compromising architectural transparency. For more details on integrity-rated options, see the 90-minute integrity glass systems suitable for egress corridors.

Selecting Fire Rated Glass Integrity and Insulation Ratings for BGC Skyscraper Facades

For BGC skyscraper facades, selecting the correct fire rated glass classification is critical. Antifires recommends EI60 or EI120 rated assemblies per EN 1634-1 for vertical enclosures, where both integrity (E) and insulation (I) are required to limit heat transfer. The 28mm EI60 panel (tested to 66 minutes integrity and 64 minutes insulation) is ideal for internal partitions, while the 50mm/54mm EI120 structure (120 minutes integrity and up to 120 minutes insulation) suits perimeter glazing exposed to typhoon wind loads common in Metro Manila. These multi-layer laminated systems incorporate intumescent gel layers that expand under fire, forming a thermal barrier that maintains unexposed side temperatures below the 140°C average rise limit. For BGC projects requiring radiation control, EW120 rated glass limits radiant heat flux, protecting adjacent egress paths. The structural framing uses M6/M8 anchor bolts at 300–600mm spacing, with 3–5mm expansion gaps filled with ceramic fiber, ensuring stability under seismic and wind loads. This combination of fire performance and structural resilience makes Antifires’ systems a preferred specification for Taguig’s vertical landmarks.

Addressing Fire Safety Demands in Taguig’s BPO Campuses and Residential Condominiums

Taguig’s rapid urbanization, driven by BPO campuses, hotel towers, and mid-rise condominiums, creates specific fire safety demands for stairwell enclosures, lobby partitions, and corridor glazing. Antifires addresses these with systems tested to BS 476 Part 22 and BS EN 1364-1, ensuring that glazed barriers maintain compartmentation integrity under real fire scenarios. For BPO centers, where open-plan layouts require transparent yet fire-resistant separations, the 21mm FPOS (120 minutes integrity, 30 minutes insulation) provides a balance of visibility and protection. In hotel towers, the 26mm door glass (89–90 minutes integrity) is specified for guest room corridor doors, meeting the 60-minute FRR typical for egress paths. For mid-rise condominiums, 15mm FPOS (132 minutes integrity, 33–34 minutes insulation) offers cost-effective insulation for unit separation walls. All installations use 12–15mm fire-rated insulation boards within the steel frame to prevent heat transfer through the perimeter. This targeted approach directly supports Taguig’s vertical expansion, ensuring that every glazed element—from lobby to stairwell—contributes to a robust passive fire protection strategy. Explore fire rated glass partitions for BPO campus applications.

Antifires’ Localized Technical Support and Import Compliance for Taguig Contractors

Antifires provides Taguig-based contractors with comprehensive technical support, including pre-approved fire test reports aligned with RA 9514 and DOLE-compliant documentation for workplace safety. The company’s localized inventory of G.M.S. steel frames, ceramic wool (3–6mm, 210 kg/m³), and intumescent seals reduces lead times for BGC projects, typically 4–6 weeks for standard EI60 assemblies. The engineering team offers on-site specification reviews to ensure compliance with the National Structural Code of the Philippines (NSCP) 2015 updates, particularly for seismic anchorage and wind load resistance. For import compliance, Antifires provides certified test data from BS EN 1634-1 and ASTM E119 standards, facilitating BFP approval. Contractors also receive installation guidelines for expansion gaps (3–5mm filled with ceramic fiber) and anchor bolt spacing (300–600mm), ensuring field performance matches test conditions. This localized support minimizes project delays and ensures that Taguig’s high-rise developments meet both fire safety and structural integrity requirements. For door-specific applications, review the fire rated glass doors product line.

REQUEST A QUOTE

Fill the form below to get in touch with us.

click

Frequently Asked Questions (FAQ)

Yes, Antifires fire rated glass assemblies are tested to BS EN 1634-1 and BS 476 Part 22, providing certified fire-resistance ratings (FRR) that directly align with RA 9514 requirements for BGC high-rise buildings. For occupancy separation and egress enclosures, the 50mm/54mm EI120 system (120 minutes integrity and insulation) meets the highest FRR demands, while the 28mm EI60 panel (66 minutes integrity, 64 minutes insulation) suits typical 60-minute rated partitions. All products come with pre-approved fire test reports that simplify BFP inspections, ensuring seamless compliance for Taguig’s vertical developments.

Typical lead times for importing fire rated glass and doors to Taguig City range from 4 to 6 weeks for standard EI60 or E90 assemblies, depending on project volume and frame specifications. Antifires maintains a localized inventory of G.M.S. steel frames and ceramic wool components, reducing procurement time. For custom EI120 or EW120 systems, lead times may extend to 8–10 weeks due to multi-layer glass fabrication. The company coordinates with accredited logistics partners to ensure timely delivery to BGC construction sites, with full customs documentation provided for import clearance.

Yes, Antifires provides localized fire test certification from BS EN 1634-1 and BS 476 Part 22 tests, which are accepted by the Bureau of Fire Protection (BFP) for Taguig’s BPO office campuses. The company also offers on-site installation support through its engineering team, including specification reviews for seismic anchorage per NSCP 2015. Contractors receive detailed installation manuals covering 3–5mm expansion gaps and M6/M8 anchor bolt spacing, ensuring field performance matches test conditions. This support streamlines BFP approval and ensures compliance with DOLE workplace safety standards.